Autonics Encoder, Incremental, 100 PPR, Quadrature Line Driver Output, 5 VDC

$194.00

Model Number:
ENH-100-1-L-5
Availability:
17
Brand:
AUTONICS

Not yet rated Write a review

Description

Incremental manual handle type rotary encoder ENH Series is an ideal solution for manual pulse input for diverse machinery including Milling machines and NC lathe. Also, it adopts terminal connection to increase user convenience.

Main Features

● Suitable for manual pulse input type such as numerically controlled or milling machinery
● Terminal connection type
● Power supply: 5VDC ±5%, 12-24VDC ±5%

.

Specifications

Item Incremental manual handle type of rotary encoder
Resolution(P/R) ¶ 1 25,100
Electrical specification Output phase A, B phase(Line driver : A, A(bar), B, B(bar) phase)
Phase difference of output Phase difference between A and B : T/2 ± T/8 (T=1cycle of A phase)
Control
output
Totem pole output • Low - Load current: Max. 30mA, Residual voltage: Max. 0.4VDC
• High - Load current: Max. 10mA
Output voltage(Power voltage 5VDC): Min. (Power voltage-2.0)VDC,
Output voltage(Power voltage 12-24VDC): Min. (Power voltage-3.0) VDC
Voltage ouput Load current: Max. 10mA, Residual voltage: Max. 0.4VDC
Line driver output • Low - Load current: Max. 20mA, Residual voltage: Max. 0.5VDC
• High - Load current: Max. -20mA, Output voltage: Min. 2.5VDC
Response
time
(Rise/Fall)
Totem pole output Max. 1µs • Measuring condition - Cable length : 1m, I sink = 20mA
Voltage output
Line driver output Max. 0.2µs
Power supply • 5VDC ±5%(Ripple P-P: Max.5%)
• 12-24VDC ±5%(Ripple P-P: Max.5%)
Current consumption Max. 40mA(disconnection of the load), Line driver output: Max. 50mA(disconnection of the load)
Max. Response frequency 10kHz
Insulation resistance Min. 100MΩ(at 500VDC megger between all terminals and case)
Dielectric strength 750VAC 50/60Hz for 1 minute(Between all terminals and case)
Connection Terminal block type
Mechanical
specification
Starting torque Max. 1kgf·cm(0.098N·m)
Shaft loading Radial: 2kgf, Thrust: 1kgf
Max. allowable revolution ¶ 2 Max. 200rpm(Normal), 600rpm(Peak)
Vibration 1.5mm amplitude or 300m/s2 at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours
Shock Approx. Max. 50G
Ambient temperature -10 to 70°C, storage: -25 to 85°C
Ambient humidity 35 to 85%RH, storage: 35 to 90°C
Protection IP50(IEC standard)
Weight¶ 3 Approx. 330g(Approx. 260g)
¶ 1: Not indicated type is customizable.
¶ 2: Make sure that. Max response revolution should be lower than or equal to max. allowable revolution when selecting the resolution.
[Max. response revolution(rpm)= Max. response frequency / Resolution × 60 sec]
¶ 3: The weight with packaging and the weight in parentheses is only unit weight.
¶ Environment resistance is rated at no freezing or condensation.


Dimensions



Connections

Reviews

Write a review