Description
Specifications
| Model | NPN open collector | BA2M-DDT | BA2M-DDTD |
| PNP open collector | BA2M-DDT-P | BA2M-DDTD-P | |
| Sensing type | Diffuse reflective | ||
| Sensing distance | 2m(Non-glossy white paper 200x200mm) | ||
| Sensing target | Translucent, opaque materials | ||
| Hysteresis | Max. 20% at sensing distance | ||
| Response time | Approx. 1ms | ||
| Power supply | 12-24VDC ±10%(Ripple P-P : Max. 10%) | ||
| Current consumption | Max. 15mA(Max. 30mA when the output is ON) | ||
| Light source | Infrared LED(850nm) | ||
| Sensitivity adjustment | Built-in the adjustment VR | ||
| Operation mode | Light ON | Dark ON | |
| Control output | NPN or PNP open collector output • Load voltage : Max. 26.4VDC • Load current: Max. 100mA • Residual voltage - NPN : Max. 1V, PNP : Min. 2.5V |
||
| Protection circuit | Reverse polarity protection, output short-circuit protection | ||
| Indicator | • Operation indicator: red • Stability indicator: orange(Light ON), green(Dark ON) | ||
| Insulation resistance | Min. 20MΩ(at 500VDC megger) | ||
| Noise resistance | ±240V the square wave noise(pulse width : 1µs) by the noise simulator | ||
| Dielectric strength | 1000VAC 50/60Hz for 1minute | ||
| Vibration | 1.5mm amplitude or 300m/s2 at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours | ||
| Shock | 100m/s2(approx 10G) in each of X, Y, Z directions for 3 times | ||
| Environment | Ambient illumination | Sunlight: Max. 11,000 lx, Incandescent lamp : Max. 3,000 Ix(Receiving illumination) | |
| Ambient temperature | -20 to 55°C, storage : -25 to 70°C | ||
| Ambient humidity | 35 to 85%RH, storage : 35 to 85%RH | ||
| Protection | IP64(IEC standard) | ||
| Material | Case: ABS, Sensing part: PC, Indicator: PC, VR: IXEF | ||
| Cable | Ø3, 3-wire, Length : 2m (AWG24, Core diameter: 0.08mm, Nunber of cores: 40, Insulator out diameter: Ø1) |
||
| Accessory | VR adjustment driver | ||
| Approval | CE | ||
| Unit weight | Approx. 50g | ||
| Document download |  |
||
Dimensions
