Description
Specifications
| Model | ADS-AF | ADS-AE | |
| Cover color | Silver | ||
| Power supply | 24-240VAC ±10% 50/60Hz, 24-240VDC ±10%(Ripple P-P : Max. 10%) |
12-24VAC ±10% 50/60Hz, 12-24VDC ±10%(Ripple P-P : Max. 10%) |
|
| Power consumption | Max. 4VA(at 240VAC) | Max. 2VA(at 24VAC) | |
| Control output | Contact type | 1a | |
| Contact capacity†1 | 50VDC 0.1A(Resistive load) | ||
| Relay life cycle | Mechanical : Min. 20,000,000 times, Electrical : Min. 50,000 times | ||
| Mounting height | 2.0m to 2.7m(Max. sensing distance : 3m) | ||
| Sensing method | Infrared reflection method | ||
| Output holding time | Time delay approx. 0.5sec. | ||
| Holding time of stationary sensing | Selectable 2sec., 7sec., 15sec. (selectable by holding time setting switch) | ||
| Interference prevention | H, L(lnterfearence prevention switch) | ||
| Front sensing area | 7.5°, 14.5°, 21.5°, 28.5°: 4 steps variable (adjusting by angle adjuster) | ||
| Adjustable sensing area | (1, 2, 3 Area), (7, 8, 9 Area) Eliminate each by each : Adjusting with eliminating right/left sensing area lever |
||
| Light source | Infrared emitting diode(modulated) | ||
| Indicator | Operation indicator : Orange, Green, Red(Refer to C-8 for the display status in operation) | ||
| Connection method | Connector wire connection | ||
| Insulation resistance | Min. 20MΩ(at 500VDC megger) | ||
| Noise resistance | ±2,000V the square wave noise(pulse width:1µs) by the noise simulator | ||
| Dielectric strength | 1.000VAC 50/60Hz for 1 minute | ||
| Vibration | 1.5mm amplitude or 300m/s2 at frequency of 10 to 55Hz in each of X, Y, Z directions for 2 hours | ||
| Shock | 100m/s²(Approx. 10G) in each of X, Y, Z directions for 3 times | ||
| Environment | Ambient illumination | Sunlight : Max. 3,000lx, Incandescent lamp : Max. 3,000 Ix(Receiver illumination) | |
| Ambient temperature | -20°C to 50°C, storage : -20 to 70°C | ||
| Ambient humidity | 35 to 85%RH, storage : 35 to 85%RH | ||
| Accessory | Cable : 2.5m, Mounting screw : 2EA, Mounting template | ||
| Protection | IP50(IEC standard) | ||
| Material | Case : ABS, Lens : Acryl, Lens cover : Acrylic | ||
| Unit weight | Approx. 320g | ||
| Document download |  |
||
It can cause bad insulation, contact fusion, bad contact, relay breakdown, and fire etc.
† The temperature or humidity mentioned in Environment indicates a non freezing or condensation environment.
Dimensions
