Description
Specifications
| Model | NPN open collector output | BRP100- DDT | BR100- DDT | BRP400- DDT | BR400- DDT | BRP200- DDTN | BR200- DDTN | BRP3M- MDT | BR3M- MDT | BR4M-TDTD BR20M-TDTD |
BR4M-TDTL BR20M-TDTL |
| BRP100- DDT-C | BR100- DDT-C | BRP400- DDT-C | BR400- DDT-C | BRP200- DDTN-C | BR200- DDTN-C | BRP3M- MDT-C | BR3M- MDT-C | BR4M-TDTD-C BR20M-TDTD-C |
BR4M-TDTL-C BR20M-TDTL-C |
||
| PNP open collector output | BRP100- DDT-P | BR100- DDT-P | BRP400- DDT-P | BR400- DDT-P | BRP200- DDTN-P | BR200- DDTN-P | BRP3M- MDT-P | BR3M- MDT-P | BR4M-TDTD-P BR20M-TDTD-P |
BR4M-TDTL-P BR20M-TDTL-P |
|
| BRP100- DDT-C-P | BR100- DDT-C-P | BRP400- DDT-C-P | BR400- DDT-C-P | BRP200- DDTN-C-P | BR200- DDTN-C-P | BRP3M- MDT-C-P | BR3M- MDT-C-P | BR4M-TDTD-C-P BR20M-TDTD-C-P |
BR4M-TDTL-C-P BR20M-TDTL-C-P |
||
| Sensing type | Diffuse reflective | Narrow beam reflective | Retroreflective | Through-beam | |||||||
| Sensing distance | 100mm†1 | 400mm†2 | 200mm†2 | 0.1 to 3m†3 | 4m / 20m | ||||||
| Sensing target | Translucent, Opaque materials | Opaque materials of min.Ø60mm | Opaque materials of min. Ø15mm | ||||||||
| Hysteresis | Max. 20% at rated setting distance | - | |||||||||
| Response time | Max. 1ms. | ||||||||||
| Power supply | 12-24VDC ±10%(Ripple P-P : Max. 10%) | ||||||||||
| Current consumption | Max. 45mA | ||||||||||
| Light source | Infrared LED(940nm) | Infrared LED(850nm) | Red LED(660nm) | Infrared LED(850nm) | |||||||
| Sensitivity adjustment | Adjustable(built-in the adjustment VR) | Fixed | |||||||||
| Operation mode | Selectable Light ON or Dark ON by control cable(White) | Dark ON | Light ON | ||||||||
| Control output | NPN or PNP open collector output • Load voltage: Max. 30VDC • Load current: Max. 200mA • Residual voltage - NPN: Max. 1V, PNP: Max. 2.5V |
||||||||||
| Protection circuit | Reverse polarity protection circuit, Output short-circuit protection circuit | ||||||||||
| Indicator | Operation indicator : red LED, Power Indicator : red LED(only for emitter of through-beam type) | ||||||||||
| Insulation resistance | Min. 20MΩ(at 500VDC megger) | ||||||||||
| Noise resistance | ±240V the square wave noise(pulse width : 1µs) by the noise simulator | ||||||||||
| Dielectric strength | 1000VAC 50/60Hz for 1 minute | ||||||||||
| Vibration | 1.5mm amplitude or 300m/s2 at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours | ||||||||||
| Shock | 500m/s²(approx. 50G) in each of X, Y, Z directions for 3 times | ||||||||||
| Environment | Ambient Illumination | Sunlight : Max. 11,000lx, Incandescent lamp : Max. 3,000lx(Receiver illumination) | |||||||||
| Ambient temperature | -10 to 60°C, storage : -25 to 75°C | ||||||||||
| Ambient humidity | 35 to 85%RH, storage : 35 to 85%RH | ||||||||||
| Protection | IP66(IEC standard) | ||||||||||
| Material | • Case - BRP: PA(Black) BR: Brass, Ni-plate • Sensing part - PC |
• Case - BRP3M: PA(Black) BR3M: Brass, Ni-plate • Sensing part - Acrylic |
• Case - Brass, Ni-plate • Sensing part - BR4M : Glass BR20M : PC |
||||||||
| Cable | • BR(P): Ø5, 4-wire, Length:2m(Emitter of through-beam type: Ø5, 2-wire, Length: 2m / Receiver:Ø5, 3-wire, Length:2m) (AWG 22, Core diameter: 0.08mm, Number of cores : 60, Insulator out diameter: Ø1.25) • BR(P)-C: M12 connector |
||||||||||
| Accessory | Individual | VR adjustment driver | VR adjustment driver, Reflector(MS-2) | - | |||||||
| Common | BR : Fixing nuts, Washer / BRP : Fixing nuts | ||||||||||
| Approval | CE | ||||||||||
| Unit weight | • BRP Series : Approx. 100g, BR Series : Approx. 120g • BRP-C Series : Approx. 30g, BR-C Series : Approx. 50g |
• BR Series:Approx. 300g • BR-C Series:Approx. 110g |
|||||||||
| Document download |  |
||||||||||
†2: Non-glossy white paper 100x100mm
†3: The sensing distance is specified with using the MS-2 reflector. Sensing distance is setting range of the reflector. The sensor can detect under 0.1m.
†Tightening torque for connector is 0.39 to 0.49N.m.
†The temperature or humidity mentioned in Environment indicates a non freezing or condensation environment.
Dimensions
Connections
