Description
Specifications
| Model | Standard type | Side sensing type |
| BY500-TDT | BYS500-TDT | |
| Sensing type | Through-beam | |
| Sensing distance | 500mm | |
| Sensing target | Opaque materials of Min. Ø5mm | |
| Response time | Max. 1ms | |
| Power supply | 12-24VDC ±10%(Ripple P-P : Max. 10%) | |
| Current consumption | Max. 30mA | |
| Light source | Infrared LED(940nm) | |
| Operation mode | Dark ON | |
| Control output | NPN open collector output • Load voltage : 30VDC • Load current : Max. 100mA • Residual voltage : Max. 1V |
|
| Protection circuit | Reverse polarity protection, output short-circuit protection | |
| Indicator | Operation Indicator : red LED | |
| Insulation resistance | Min. 20MΩ(at 500VDC megger) | |
| Noise resistance | ±240V the square wave noise(pulse width : 1µs) by the noise simulator | |
| Dielectric strength | 1,000VAC 50/60Hz for 1 minute | |
| Vibration | 1.5mm amplitude or 300m/s2 at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours | |
| Shock | 500m/s2(approx. 50G) in each of X, Y, Z directions for 3 times | |
| Environ-ment_Ambient illumination | Sunlight : Max. 11,000lx Incandescent lamp : Max. 3,000lx(Receiving illumination) | |
| Environment Ambient temperature | -10 to 60°C, storage : -25 to 70°C | |
| Environ-ment_Ambient humidity | 35 to 85%RH, storage : 35 to 85%RH | |
| Protection | IP50(IEC standard) | |
| Material | Case : ABS, Sensing part : Acrylic | |
| Cable | Ø4, 4-wire, Length : 2m (Emitter of through-beam type: Ø4, 3-wire, Length: 2m) (AWG22, Core diameter: 0.08mm, Nunber of cores: 60, Insulator out diameter: Ø1.25) |
|
| Accessory | Mounting bracket, Bolts/Nuts | |
| Unit weight | Approx. 150g | |
| Document download |  |
|
Dimensions
Connections
