Description
Specifications
| Model | BEN10M-TFR | BEN5M-MFR | BEN3M-PFR | BEN300-DFR | |
| Sensing type | Through-beam | Retroreflective (Standard type) |
Retroreflective (Built-in polarizing filter) |
Diffuse reflective | |
| Sensing distance | 10m | 0.1 to 5m † 1 | 0.1 to 3m † 1 | 300mm † 2 | |
| Sensing target | Opaque materials of Min. Ø16mm | Opaque materials of Min. Ø60mm | Translucent, Opaque materials | ||
| Hysteresis | - | Max. 20% at ratedsetting distance | |||
| Response time | Max. 20ms | ||||
| Response time | 24-240VAC ±10% 50/60Hz, 24-240VDC ±10%(Ripple P-P : Max. 10%) | ||||
| Power consumption | Max. 4VA | ||||
| Light source | Infrared LED(850nm) | Red LED(660nm) | Infrared LED(940nm) | ||
| Sensitivity adjustment | - | Adjustment VR | |||
| Operation mode | Selectable Light ON or Dark ON by VR | ||||
| Control output | Relay contact output • Relay contact capacity: 30VDC 3A of resistive load, 250VAC 3A resistive load • Relay contact composition: 1c |
||||
| Relay lifetime | Mechanically: Min. 50,000,000 operation, Electrically: Min. 100,000 operation | ||||
| Light receiving element | Photo IC | ||||
| Indicator | Operation indicator: red, Stability indicator: green (The red lamp on Emitter of transmitted beam type is for power indication) |
||||
| Insulation resistance | Min. 20MΩ(at 500VDC megger) | ||||
| Insulation type | Double or strong insulation (Mark :ⅅ, Dielectric voltage between the measured input and the power: 1kV) | ||||
| Noise resistance | ±1,000V the square wave noise(pulse width : 1µs) by the noise simulator | ||||
| Dielectric strength | 1000VAC 50/60Hz for 1 minute | ||||
| Vibration | Mechanical | 1.5mm amplitude or 300m/s2 at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours | |||
| Malfunction | 1.5mm amplitude or 300m/s2 at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 10 minutes | ||||
| Shocktd> | Mechanical | 500m/s²(approx. 50G) In each of X, Y, Z directions for 3 times | |||
| Malfunction | 100m/s²(approx. 10G) In each of X, Y, Z directions for 3 times | ||||
| Environ-ment | Ambient Illumination | Sunlight : Max. 11,000lxIncandescent lamp : Max. 3,000lx(Receiver illumination) | |||
| Ambient temperature | -20 to 65°C, storage : -25 to 70°C | ||||
| Ambient humidity | 35 to 85%RH, storage : 35 to 85%RH | ||||
| Protection | IP50(IEC standard) | ||||
| Material | • Case, Case cover: Heat resistant ABS • Sensing part: PC(with polarizing filter: PMMA) |
||||
| Cable | Ø5, 5-wire, Length: 2m(Emitter of through-beam type: Ø5.0, 2-wire, Length: 2m) (AWG22, Core diameter: 0.08mm, Number of cores: 60, Insulator out diameter: Ø1.25) |
||||
| Accessory | Individual | - | Reflector(MS-2) | - | |
| Common | VR adjustment driver, Mounting bracket, Bolts/nuts | ||||
| Unit weight | Approx. 354g | Approx. 208g | Approx. 195g | ||
| Document download |  |
||||
† 2: It is for Non-glossy white paper(100×100mm)
† The temperature or humidity mentioned in Environment indicates a non freezing or condensation environment.
Dimensions
Connections
