Description
Specifications
| Model | BF3RX | BF3RX-P | |
| Response time | Max. 1ms | ||
| Power supply | 12-24VDC ±10%(Ripple P-P : Max. 10%) | ||
| Current consumption | Max. 40mA | ||
| Light source | Red LED(Modulated) | ||
| Sensitivity adjustment | Adjustable VR(Double adjustment:Coarse adjustment, Fine adjustment) | ||
| Operation mode | Selectable Light ON or Dark ON by control cable | ||
| Control output | NPN or PNP open collector output • Load voltage: Max. 30VDC • Load current: Max. 200mA, • Residual voltage - NPN: Max. 1V, PNP: Max. 2.5V |
||
| Protection circuit | Reverse power polarity, output short-circuit protection circuit | ||
| Indication | Operation Indicator : Red LED | ||
| Insulation resistance | Min. 20MΩ(at 500VDC megger) | ||
| Noise resistance | ±240V the square wave noise(pulse width : 1µs)by the noise simulator | ||
| Dielectric strength | 1.000VAC 50/60Hz for 1 minute | ||
| Vibration | 1.5mm amplitude or 300m/s2 at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours | ||
| Shock | 500m/s²(approx. 50G) in each of X, Y, Z directions for 3 times | ||
| Environment | Ambient illumination | Sunlight : Max. 11,000lx Incandescent lamp : Max. 3,000lx (Receiver illumination) | |
| Ambient temperature | -10 to 50°C, storage : -25 to 70°C | ||
| Ambient humidity | 35 to 85%RH, storage : 35 to 85%RH | ||
| Material | Case : ABS, Cover : PC | ||
| Cable | Ø5, 4-wire, Length : 2m (AWG24, Core diameter: 0.08mm, Number of cores: 40, Insulator out diameter: Ø1) |
||
| Accessory | VR adjustment driver, Mounting bracket, Bolts/nuts | ||
| Unit weight | Approx. 90g | ||
| Document download |  |
||
