$147.00

Model Number:
PSA-01P-NPT1/8
Availability:
20
Brand:
AUTONICS

Not yet rated Write a review

Description

The regular square type PSA series realizing small size and high accuracy digital pressure control is to increase visibility with high luminance red LED (LED height: 9.5mm) and to implement 1/1,000 high resolution, max 2.5ms response time. Also, the series is high reliability digital pressure sensor supporting various output modes and analog output (1-5VDC) scale function in order to be used in various operating environments.

Main Features

● High accuracy digital pressure sensor
● High brightness red LED(LED height : 9.5mm)
● High resolution : 1/1000
● Convertible pressure unit
- Negative pressure, Compound pressure : kPa, kgf/cm2, bar, psi, mmHg, mmH2O, inHg
- Standard pressure : kPa, kgf/cm2, bar, psi
● Various output modes : Hysteresis mode, Automatic sensitivity setting mode, Independent 2 output mode, Window comparative output mode
● Chattering prevention for output (Selectable response time : 2.5, 5, 100, 500ms)
● Analog output(1-5VDC) scale function
● Reverse power polarity and overcurrent protection circuit
● Zero-point adjustment function
● Peak and Bottom hold display

.

Specifications

Pressure type Gauge pressure
Negative pressure Standard pressure Compound pressure
Model†1 NPN open collector output PSA-V01-
PSB-V01-
PSB-V01CPSA-
PSA-01-
PSB-01-

PSB-01C-
PSA-1-
PSB-1-

PSB-1C-
PSA-C01-
PSB-C01-
PSB-C01C-
PNP open collector output PSA-V01PPSB-
V01PPSB-
V01CP-
PSA-01 P-
PSB-01P-

PSB-01CP-
PSA-1P-
PSB-1P-

PSB-1CP-
PSA-C01P-
PSB-C01P-

PSB-C01CP-
Rated pressure range 0.0 to-101.3kPa 0.0 to 100.0kPa 0.0 to 1,000kPa -100.0 to 100.0kPa
Display and set pressure range 5.0 to -101.3kPa -5.0 to 110.0kPa -50 to 1,100kPa -101.2 to 110.0kPa
Max. pressure range 2 times of rated pressure 1.5 times of rated pressure 2 times of rated pressure
Applied fluid Air, Non-corrosive gas
Power supply 12-24VDC ±10%(Ripple P-P : Max. 10%)
Current consumption Max. 50mA
Control output NPN or PNP open collector output
• Load voltage: Max. 30VDC
• Load current: Max. 100mA
• Residual voltage - NPN: Max. 1V, PNP: Max. 2V
Control output Hysteresis†2 1digit fixed(2digits for psi unit) 2dlgit fixed
Repeat error ±0.2% F.S. ±1 digit ±0.2% F.S. ±2dlgit
Response time Selectable 2.5ms, 5ms, 100ms, 500ms
Short circuit protection Built-In
Analog output • Output voltage: 1-5VDC ±2% F.S.
• Zero-point: Within 1VDC ±2% F.S.
• Span: Within 4VDC ±2% F.S.
• Linear: Within ±2% F.S.
• Resolution: Approx. 1/200
• Output impedance: 1kΩ
Display digit 3½ digit
Display method 7Segment LED
Min. display interval 1dlgit(psi unit: 2 digits are fixed) 2dlgits
Pressure unit kPa, kgf/cm2 , bar, psi, mmHg, mmH2O, inHg kPa, kgf/cm², bar, psi kPa, kgf/cm², bar, psi, mmHg, mmH20, InHg
Display accuracy 0°C to 50°C: Max. ±1% F.S., -10 to 0°C : Max. ±2% F.S.
Environ-ment Ambient temperature -10 to 50°C, storage: -20 to 60°C
Ambient humidity 35 to 95%RH, storage: 35 to 95%RH
Vibration 1.5mm amplitude at frequency of 10 to 55Hz(for 1 mln.) in each of X, Y, Z directions for 2 hours
Material • PSA - Front case: PC, Rear case: PC(Insert glass), Pressure port: die-cast(Zn)
• PSB - Case, Pressure port: PA
• PSB-C - Case, Pressure port, Cover: IXEF
Protection IP40(IEC standard)
Cable Cable integrated type Ø4, 5-wire, Length : 2m
(AWG24, Core diameter: 0.08mm, Number of cores: 40, Insulation out diameter: Ø1mm)
Connector type 5-wire, Length : 3m(AWG24, Insulation out diameter : Ø1mm)
Approval CE
Unit weight • PSA: Approx. 120g   • PSB: Approx. 70g   • PSB-C: Approx. 80g
Document download
†1: '⁏' is pressure port type.
†2: In hysteresis output mode, detection difference is variable.
†F.S.: Rated pressure.
†There may be ±1digit error in hysteresis by pressure unit calculation error.
†The specification of pressure port is marked on the upper part of the case.
Pressure ports are distinguished by the colors, silver [Rc(PT)1/8] or black [NPT1/8].
†Environment resistance is rated at no freezing or condensation.


Dimensions

Reviews

Write a review