Description
ARD Series is a DeviceNet remote I/O available in digital terminal block and sensor connector types and in analog terminal block types. A vast range of line-ups offers flexibility in user options in different work environments. Autonics ARD Series features exceptional compatibility, outstanding noise resistance and reliability. Also, this series can be installed on DIN rail or using screws.
Main features
DeviceNet Digital Remote I/O: Enables to recognize communication speed automatically
when connecting with master
: If PV is lower than SV, enables to receive error flag for network power monitoring as Explicit message.
- Sensor connector type: Connectable up to 7 expansion units
- Expandable I/O points up to max. 64 points for Standard terminal type, sensor connector type
: Reads the number of connected expansion units
DeviceNet Analog Remote I/O
: Communicates other DeviceNet devices without additional installations
: Configuratable power and communication system only with communication cables
: Connectable max. 63 units per 1 master unit
: Automatic communication speed recognition, Network voltage monitoring, Input digital filter, Peak/Bottom Hold, hysterisis, reading model name and number of units, I/O and status flag monitoring
Application
* Automobile production line
.
Specifications
| Model | Basic unit | ARD-DI08A | ARD-DI16N | ARD-DI16P | ARD-DO08R | ARD- DO08S | ARD- DO16N | ARD- DO16P | ARD- DX16N | ARD- DX16P |
| Expansion unit | ARD-DI08AE | ARD-DI16NE | ARD-DI16PE | ARD-DO08RE | ARD- DO08SE | ARD- DO16NE | ARD- DO16PE | ARD- DX16NE | ARD- DX16PE | |
| Power supply | Rated voltage: 24VDC, Voltage range: 12-28VDC | |||||||||
| Power consumption | Max. 3W | |||||||||
| Insulation type | Photocoupler isolated | |||||||||
| I/O points | AC input 8-polnt | NPN Input 16-polnt | PNP input 16-point | Relay output 8-polnt | SSR output 8-point | NPN output 16-point | PNP output 16-point | NPN Input 8-polnt + output 8-point | PNP Input 8-point + output 8-point | |
| Control I/O | Voltage | 75-250VAC | 10-28VDC | Normally open(N.O.) 250VAC 2A1a | 30-250VAC | 10-28VDC(voltage drop: max. 0.5VDC) | ||||
| Current | 13mA/point | 10mA/polnt | 1A/point | 0.5A/point (leakage current: max. 0.5 mA) | Input: 10mA, Output: 0.5A/point (leakage current: max. 0.5mA) | |||||
| Common | 8-polnt, common | 1-point, COM | 8-point, common | |||||||
| Insulationresistance | Min. 200MΩ(at 500VDC megger) | |||||||||
| Noise resistance | ±240 V the square wave noise (pulse width: 1µs) by the noise simulator | |||||||||
| Dielectric strength | 1000 VAC 50/60 Hz for 1 min. | |||||||||
| Vibration | 1.5 mm amplitude at frequency of 10 to 55Hz (for 1 min.) in each of X, Y, Z directions for 2 hours | |||||||||
| Shock | 500 m/s2(approx. 50G)in X, Y, Z directions for 3 times | |||||||||
| Environment | Ambient temperature | -10 to 50°C, Storage : -25 to 75 °C | ||||||||
| Ambient humidity | 35 to 85%RH, Storage : 35 to 85%RH | |||||||||
| Protection | IP20(IEC standard) | |||||||||
| Protection circuit | Surge protection circuit, Reverse polarity protection circuit (common) • Transistor output type - Overcurrent protection circuit (NPN type : operated at min. 1.9A -> re-supply power in overcurrent status, PNP type : operated at min. 0.7A), Overheating protection clrcult(165°C Typical), Short-circuit Protection circuit |
|||||||||
| Indicator | Network status (NS) LED (green, red), Unit status (MS) LED (qreen, red), I/O status LED (Input: green, Output: red) | |||||||||
| Material | Front case, Body Case: PC, Rubber cap: NBR | |||||||||
| Mounting | DIN Rail or screw lock type | |||||||||
| Approval | DeviceNet | CE, DeviceNet | DeviceNet | CE, DeviceNet | ||||||
| Unit weight | Approx. 150g | Approx. 140g | Approx. 160g | Approx. 170g | Approx. 140g | |||||
| Document download |  |
|||||||||
