Autonics Remote I/O Device Net, DC NPN output 16 points, Control output 10 - 28VDC, 10mA / contact, Power 12 - 28VDC

$243.00

Model Number:
ARD-DO16N
Availability:
Call + 1. 847. 388. 7191
Brand:
AUTONICS

Not yet rated Write a review

Description

ARD Series is a DeviceNet remote I/O available in digital terminal block and sensor connector types and in analog terminal block types. A vast range of line-ups offers flexibility in user options in different work environments. Autonics ARD Series features exceptional compatibility, outstanding noise resistance and reliability. Also, this series can be installed on DIN rail or using screws.

Main features

DeviceNet Digital Remote I/O
  • Automatic communication speed recognition
    : Enables to recognize communication speed automatically
    when connecting with master
  • Network Voltage monitoring
    : If PV is lower than SV, enables to receive error flag for network power monitoring as Explicit message.
  • Additional expansion units
  • - Standard terminal block type: Connectable up to 3 expansion units
    - Sensor connector type: Connectable up to 7 expansion units
    - Expandable I/O points up to max. 64 points for Standard terminal type, sensor connector type
  • Reading the number of expansion units
    : Reads the number of connected expansion units
  • Reading model name: Reads the connected model name of connected units (sensor connector type)
  • Reading the unit specifications: Reads the specifications of connected units

  • DeviceNet Analog Remote I/O
  • Adopts DeviceNet, standard open Network
    : Communicates other DeviceNet devices without additional installations
    : Configuratable power and communication system only with communication cables
    : Connectable max. 63 units per 1 master unit
  • Strong against noise and high accuracy(0.3%) measurement with differential input method(measuring difference between +, - input signal)
  • Various I/O range: 0-5VDC, 1-5VDC, 0-10VDC, -5-5VDC, -10-10VDC, DC4-20mA, DC0-20mA
  • Scale function: Settable high/low limit scale value
  • Various functions
    : Automatic communication speed recognition, Network voltage monitoring, Input digital filter, Peak/Bottom Hold, hysterisis, reading model name and number of units, I/O and status flag monitoring
  • Built-in surge, ESD protection, Reverse polarity protection circuit
  • Mounting DIN rail method and screw lock method



  • Application
    * Automobile production line

    .

    Specifications

    Model Basic unit ARD-DI08A ARD-DI16N ARD-DI16P ARD-DO08R ARD- DO08S ARD- DO16N ARD- DO16P ARD- DX16N ARD- DX16P
    Expansion unit ARD-DI08AE ARD-DI16NE ARD-DI16PE ARD-DO08RE ARD- DO08SE ARD- DO16NE ARD- DO16PE ARD- DX16NE ARD- DX16PE
    Power supply Rated voltage: 24VDC, Voltage range: 12-28VDC
    Power consumption Max. 3W
    Insulation type Photocoupler isolated
    I/O points AC input 8-polnt NPN Input 16-polnt PNP input 16-point Relay output 8-polnt SSR output 8-point NPN output 16-point PNP output 16-point NPN Input 8-polnt + output 8-point PNP Input 8-point + output 8-point
    Control I/O Voltage 75-250VAC 10-28VDC Normally open(N.O.) 250VAC 2A1a 30-250VAC 10-28VDC(voltage drop: max. 0.5VDC)
    Current 13mA/point 10mA/polnt 1A/point 0.5A/point (leakage current: max. 0.5 mA) Input: 10mA, Output: 0.5A/point (leakage current: max. 0.5mA)
    Common 8-polnt, common 1-point, COM 8-point, common
    Insulationresistance Min. 200MΩ(at 500VDC megger)
    Noise resistance ±240 V the square wave noise (pulse width: 1µs) by the noise simulator
    Dielectric strength 1000 VAC 50/60 Hz for 1 min.
    Vibration 1.5 mm amplitude at frequency of 10 to 55Hz (for 1 min.) in each of X, Y, Z directions for 2 hours
    Shock 500 m/s2(approx. 50G)in X, Y, Z directions for 3 times
    Environment Ambient temperature -10 to 50°C, Storage : -25 to 75 °C
    Ambient humidity 35 to 85%RH, Storage : 35 to 85%RH
    Protection IP20(IEC standard)
    Protection circuit Surge protection circuit, Reverse polarity protection circuit (common)
    • Transistor output type - Overcurrent protection circuit (NPN type : operated at min. 1.9A -> re-supply power in overcurrent status, PNP type : operated at min. 0.7A), Overheating protection clrcult(165°C Typical), Short-circuit Protection circuit
    Indicator Network status (NS) LED (green, red), Unit status (MS) LED (qreen, red), I/O status LED (Input: green, Output: red)
    Material Front case, Body Case: PC, Rubber cap: NBR
    Mounting DIN Rail or screw lock type
    Approval DeviceNet CE, DeviceNet DeviceNet CE, DeviceNet
    Unit weight Approx. 150g Approx. 140g Approx. 160g Approx. 170g Approx. 140g
    Document download
    † Environment resistance is rated at no freezing or condensation.

    Reviews

    Write a review