Description
Specifications
| Model | ATS8W-⇽1 | ATS11W-⇽1 | ATS8W-⇽3 | ATS11W-⇽3 | |
| Function | ON/OFF Flicker operation | ||||
| Control time setting range | 0.1sec to 10hour | 0.3sec to 30hour | |||
| Power supply | • 100-240VAC 50/60Hz, 24-240VDC (universal) • 24VAC 50/60Hz, 24VDC (universal) • 12VDC | ||||
| Allowable voltage range | 90 to 110% of rated voltage | ||||
| Power consumption | • 100-240VAC : 4.2VA, 24-240VDC : 2W • 24VAC : 4.5VA, 24VDC : 2W • 12VDC : 1.5W | ||||
| Return time | Max. 100ms | ||||
| Time operation | Power ON Start type | ||||
| Control output | Contact type | Time limit DPDT(2c), Instantaneous SPDT(1c)+Time limit SPDT(1c) selectable according to output operation mode | |||
| Contact capacity | 250VAC 3A resistive load | ||||
| Relay life cycle | Mechanical | Min. 10,000,000 operations | |||
| Electrical | Min. 100,000 operatlons(250VAC 3A resistive load) | ||||
| Repeat error | Max. ±0.2% ±10ms | ||||
| Set error | Max. ±5% ±50ms | ||||
| Voltage error | Max. ±0.5% | ||||
| Temperature error | Max. ±2% | ||||
| Insulation resistance | 100MΩ (at 500VDC megger) | ||||
| Dielectric strength | 2000VAC 50/60Hz for 1 min. | ||||
| Noise resistance | ±2kV the square wave noise (pulse width 1µs) by noise simulator | ||||
| Vibration | Mechanical | 0.75mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 1 hour | |||
| Malfunction | 0.5mm mplltude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 10 min. | ||||
| Shock | Mechanical | 300m/s²(approx. 30G) in each of X, Y, Z directions 3 times | |||
| Malfunction | 100m/s²(approx. 10G) in each of X, Y, Z directions 3 times | ||||
| Environment | Ambient temperature | -10 to 55°C, storage: -25 to 65°C | |||
| Ambient humidity | 35 to 85%RH | ||||
| Approval | CE,UL | ||||
| Accessory | Bracket | ||||
| Unit weight | Approx. 72g | ||||
| Document download |  | ||||
