Description
Specifications
| Series | TZ4SP | TZN4S | TZ4ST | TZ4M | TZN4M | TZ4W TZN4W | TZ4H TZN4H | TZ4L | TZN4L | |
| Power supply | AC Power | 100-240VAC 50/60Hz | ||||||||
| AC/DC Power¶ 1 | 24VAC 50/60HZ / 24-48VDC | |||||||||
| Allowable voltagerange | 90 to 110% of rated voltage | |||||||||
| Power consumption | Max. 5VA | Max. 6VA | ||||||||
| AC: Approx. 8VA, DC: Max. 7W |
- | AC: Approx. 8VA, DC: Max. 7W |
- | AC: Approx. 8VA, DC: Max. 7W |
- | AC: Approx. 8VA, DC: Max. 7W |
- | |||
| Display method | 7Segment LED Display [Process value(PV) : Red, Setting value(SV) : Green] | |||||||||
| Character size(WxH) | TZ4SP: 4.8×7.8mm TZN4S: PV:7.8×11.0mm SV:5.8×8.0mm |
4.8×7.8mm |
TZ4M: PV:9.8×14.2mm SV:8.0×10.0mm TZN4M: PV:8.0×13.0mm SV:5.0×9.0mm |
8.0×10.0mm | TZ4H: 3.8×7.6mm TZN4H: PV:7.8×11.0mm SV:5.8×8.0mm |
PV:9.8×14.2mm SV:8.0×10.0mm |
||||
| Input type | RTD | DPt100Ω, JPt100Ω, 3wire (allowable line resistance max. 5Ω per a wire) | ||||||||
| Thermocouple | K(CA), J(IC), R(PR), E(CR), T(CC), S(PR), N(NN), W(TT) (allowable line resistance max. 100Ω) | |||||||||
| Analog | 1-5VDC, 0-10VDC, DC4-20mA | |||||||||
| Control output | Relay | 250VAC 3A 1c | ||||||||
| SSR | 12VDC ±3V 30mA Max. | |||||||||
| Current | DC4-20mA(Resistive load Max. 600Ω) | |||||||||
| Sub output | PV transmission | - | PV transmission : DC4-20mA Load max. 600Ω | |||||||
| EVENT 1 | 250VAC 1A1a | |||||||||
| EVENT2 | - | 250VAC 1A 1a | ||||||||
| Communication | - | - | RS485(PV transmission, SV setting) | |||||||
| Control type | ON/OFF, P, PI, PD, PIDF, PIDS control | |||||||||
| Display accuracy | F.S. ±0.3% or 3°C, select the higher one | |||||||||
| Setting type | Front push buttons | |||||||||
| Hysteresis | 1~100°C(0.1 to 100.0°C) variable(ON/OFF control) | |||||||||
| Alarm output hysteresis | Adjustable ON/OFF 1 to 100 (0.1 to 100.0)°C of alarm output | |||||||||
| Proportional band(P) | 0.0 to 100.0% | |||||||||
| Intergral time(l) | 0 to 3600 sec. | |||||||||
| Derivative time(D) | 0 to 3600 sec. | |||||||||
| Control time(T) | 1 to 120 sec. | |||||||||
| Sampling period | 0.5 sec. | |||||||||
| LBA setting | 1 to 999 sec. | |||||||||
| RAMP setting | Ramp Up, Ramp Down at 1 to 99min. | |||||||||
| Dielectric strength | 2,000VAC 50/60Hz for 1min. (between power source terminal and input terminal) | |||||||||
| Vibration | 0.75mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours | |||||||||
| Relay life cycle | Main output | Mechanical : Min. 10,000,000 operations, Electrical : Min. 100,000 operations(250VAC 3A resistive load) | ||||||||
| Sub output | Mechanical : Min. 20,000,000 operations, Electrical : Min. 500,000 operations(250VAC 1A resistive load) | |||||||||
| Insulation resistance | Min. 100MΩ(at 500VDC megger) | |||||||||
| Noise | ±2kV the square wave noise (pulse width: 1us) by the noise simulator | |||||||||
| Memory protection | Approx. 10years(When using non-volatile semiconductor memory) | |||||||||
| Environment | Ambient temperature | -10 to 50°C, storage: -20 to 60°C | ||||||||
| Ambient humidity | 35 to 85%RH, storage: 35 to 85%RH | |||||||||
| Approval | CE, UL, RoHS(TZN4S) | |||||||||
| Unit weight | TZ4SP: Approx. 136g TZN4S: Approx. 150g |
Approx. 136g | Approx. 270g | TZ4W: Approx. 270g TZN4W: Approx. 259g | Approx. 259g | Approx. 360g | ||||
| Document download |  |
|||||||||
¶ 1. AC/DC power type is only for TZ4SP, TZ4ST, TZN4M, TZ4L Series.
¶ Environment resistance is rated at no freezing or condensation.
