| Model |
LE7M-2 |
| Power supply |
100-240VAC 50/60Hz |
| Allowable voltage range |
90 to 110% of rated voltage |
| Power consumption |
Max. 4.2VA |
| RETURN Input |
Short-circuit or open by switch or relay |
| Timing program |
48 steps for weekly, 24 steps for yearly |
| Operation mode |
ON/OFF mode, cycle mode, pulse mode |
| Mounting |
Front panel, surface, DIN rail |
| Time deviation |
±15sec./month(ambient temperature: 25°C) (±4sec. /week) |
| Temperature error |
±0.01% ±0.05sec.(ratio by set time) |
| Memory protection |
Over 5 years(at 25°C) |
| Control Output |
Contact type |
SPDT(Single Pole Double Throw) |
| Contact capacity |
250VAC 10A resistive load |
| Output number |
Independent 2 output(1c x 2) |
| Relay life cycle |
Mechanical |
Min. 5,000,000 operations(switching capacity: 30 times/min) |
| Electrical |
Min. 50,000 operations<switching capacity: 20 times/min, 250VAC 10A(resistive load)> |
| Insulation resistance |
Min. 100MΩ(at 500VDC megger) |
| Dielectric strength |
2000VAC 50/60Hz for 1 minute |
| Noise strength |
±2kV the square wave noise(pulse width : 1µs) by the noise simulator |
| Environment |
Ambient temperature |
-10 to 55°C, storage: -25 to 65°C |
| Ambient humidity |
35 to 80%RH |
| Unit weight |
Approx. 272g |
| Document download |
 |
