Temp/Humidity Transducer, Duct mount, 200mm sensing pole, 3 digit display, RS485 output (Modbus RTU), 24VDC power

$356.00

Model Number:
THD-DD2-T
Availability:
Call + 1. 847. 388. 7191
Brand:
AUTONICS

Not yet rated Write a review

Description

Model THD-R-PT THD-R-PT/C THD-R-C
THD-R-V
THD-R-T
THD-D[ ]-[ ]
THD-W[ ]-[ ]
THD-DD[ ]-[ ]
THD-WD[ ]-[ ]
Display type - Non-indicating type 7Segment LED display
Display digit - - Each 3digits for
temp./ humidity
Character size - - W6.2×H10.0mm
Power supply - 24VDC
Allowable voltage range 90 to 110% of rated voltage
Power consumption - Max. 2.4W
Measuring input Temperature
(Built-in sensor)
Temperature, Humidity(Built-in sensor)
Output¶ 1 Temp. DPt100Ω resistance value DC4-20mA, 1-5VDC,
RS485 communication output(Modbus RTU)
Humidity - DC4-20mA
Measurement
range
Temp. -19.9 to 60.0°C
Humidity - 0.0 to 99.9%RH(THD-R is required to attend for using over 90%RH.)
Accuracy Temp. Max. ±0.8°C -19.9 to 5.0°C : Max. ±1.0°C, 5.0 to 40.0°C : Max. ±0.5°C,
40.0 to 60.0°C : Max. ±1.0°C rdg ±1digit(At below -10ºC, within 1.5°C)
Humidity - Max. ±3%RH at 30 to 70%RH
(at 25 to 45°C)
Sampling cycle - Fixed in 0.5 sec.
Insulation resistance - Min. 100MΩ(at 500VDC megger)
Dielectric strength - 500VAC 50/60Hz for 1 minute
Noise strength - ±0.3kV the square wave noise(pulse width:1µs) by the noise simulator
Vibration Mechanical - 0.75mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 1hour
Malfunction - 0.5mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 10min.
Shock Mechanical - 300m/s²(approx. 30G) in each of X, Y, Z directions for3 times
Malfunction - 100m/s²(approx. 10G) in each of X, Y, Z directions for 3 times
Protection IP10 IP65(Except sensing part)
Ambient temperature -20 to 60°C, storage : -20 to 60°C
Cable Terminal type 4-wire, ø4, Length: 2m
Approval CE
Unit weight Approx. 55g Approx. 160g
Document download
¶ 1. The allowable impedance of current output is max. 600Ω
¶ Environment resistance is rated at no freezing or condensation. .

Specifications

Model THD-R-PT THD-R-PT/C THD-R-C
THD-R-V
THD-R-T
THD-D[ ]-[ ]
THD-W[ ]-[ ]
THD-DD[ ]-[ ]
THD-WD[ ]-[ ]
Display type - Non-indicating type 7Segment LED display
Display digit - - Each 3digits for
temp./ humidity
Character size - - W6.2×H10.0mm
Power supply - 24VDC
Allowable voltage range 90 to 110% of rated voltage
Power consumption - Max. 2.4W
Measuring input Temperature
(Built-in sensor)
Temperature, Humidity(Built-in sensor)
Output¶ 1 Temp. DPt100Ω resistance value DC4-20mA, 1-5VDC,
RS485 communication output(Modbus RTU)
Humidity - DC4-20mA
Measurement
range
Temp. -19.9 to 60.0°C
Humidity - 0.0 to 99.9%RH(THD-R is required to attend for using over 90%RH.)
Accuracy Temp. Max. ±0.8°C -19.9 to 5.0°C : Max. ±1.0°C, 5.0 to 40.0°C : Max. ±0.5°C,
40.0 to 60.0°C : Max. ±1.0°C rdg ±1digit(At below -10ºC, within 1.5°C)
Humidity - Max. ±3%RH at 30 to 70%RH
(at 25 to 45°C)
Sampling cycle - Fixed in 0.5 sec.
Insulation resistance - Min. 100MΩ(at 500VDC megger)
Dielectric strength - 500VAC 50/60Hz for 1 minute
Noise strength - ±0.3kV the square wave noise(pulse width:1µs) by the noise simulator
Vibration Mechanical - 0.75mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 1hour
Malfunction - 0.5mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 10min.
Shock Mechanical - 300m/s²(approx. 30G) in each of X, Y, Z directions for3 times
Malfunction - 100m/s²(approx. 10G) in each of X, Y, Z directions for 3 times
Protection IP10 IP65(Except sensing part)
Ambient temperature -20 to 60°C, storage : -20 to 60°C
Cable Terminal type 4-wire, ø4, Length: 2m
Approval CE
Unit weight Approx. 55g Approx. 160g
Document download
¶ 1. The allowable impedance of current output is max. 600Ω
¶ Environment resistance is rated at no freezing or condensation.

Reviews

Write a review