$176.00

Model Number:
TZN4W-14C
Availability:
Call + 1. 847. 388. 7191
Brand:
AUTONICS

Not yet rated Write a review

Description

Dual PID temperature controller TZN/TZ realizes ±0.3% high display accuracy by F.S value of each input. The series also supports various functions including 2-step auto tuning control function, diverse sub-output function; in addition, 13 kinds of multi-input function which makes temperature sensors, voltage and current input possible is also embodied in order to guarantee better users’ convenience.

Main features
  • Dual PID auto tuning function: High-speed response of PID control to reach to the desired value fast, low-speed of response of PID control to minimize the overshoot even though response is a little bit slow.
  • High display accuracy: ±0.3%(by F.S. value of each input)
  • 2-Steps auto tuning control function
  • Multi-input function (13 kinds of multi-input selection function): Temperature sensor, voltage and current selection function.
  • Various sub output function: Includes in LBA, SBA, 7kinds of alarm output and 4 kinds of alarm option function, PV transmission output(DC4-20mA), RS485 communication output
  • Display the decimal point for analog input
  • .

    Specifications

    Series TZ4SP TZN4S TZ4ST TZ4M TZN4M TZ4W  TZN4W TZ4H  TZN4H TZ4L TZN4L
    Power supply AC Power 100-240VAC 50/60Hz
    AC/DC Power¶ 1 24VAC 50/60HZ / 24-48VDC
    Allowable voltagerange 90 to 110% of rated voltage
    Power consumption Max. 5VA Max. 6VA
    AC: Approx. 8VA,
    DC: Max. 7W
    - AC: Approx. 8VA,
    DC: Max. 7W
    - AC: Approx. 8VA,
    DC: Max. 7W
    - AC: Approx. 8VA,
    DC: Max. 7W
    -
    Display method 7Segment LED Display [Process value(PV) : Red, Setting value(SV) : Green]
    Character size(WxH) TZ4SP:
    4.8×7.8mm
    TZN4S:
    PV:7.8×11.0mm
    SV:5.8×8.0mm

    4.8×7.8mm

    TZ4M:
    PV:9.8×14.2mm
    SV:8.0×10.0mm
    TZN4M:
    PV:8.0×13.0mm
    SV:5.0×9.0mm
    8.0×10.0mm TZ4H:
    3.8×7.6mm
    TZN4H:
    PV:7.8×11.0mm
    SV:5.8×8.0mm
    PV:9.8×14.2mm
    SV:8.0×10.0mm
    Input type RTD DPt100Ω, JPt100Ω, 3wire (allowable line resistance max. 5Ω per a wire)
    Thermocouple K(CA), J(IC), R(PR), E(CR), T(CC), S(PR), N(NN), W(TT) (allowable line resistance max. 100Ω)
    Analog 1-5VDC, 0-10VDC, DC4-20mA
    Control output Relay 250VAC 3A 1c
    SSR 12VDC ±3V 30mA Max.
    Current DC4-20mA(Resistive load Max. 600Ω)
    Sub output PV transmission - PV transmission : DC4-20mA Load max. 600Ω
    EVENT 1 250VAC 1A1a
    EVENT2 - 250VAC 1A 1a
    Communication - - RS485(PV transmission, SV setting)
    Control type ON/OFF, P, PI, PD, PIDF, PIDS control
    Display accuracy F.S. ±0.3% or 3°C, select the higher one
    Setting type Front push buttons
    Hysteresis 1~100°C(0.1 to 100.0°C) variable(ON/OFF control)
    Alarm output hysteresis Adjustable ON/OFF 1 to 100 (0.1 to 100.0)°C of alarm output
    Proportional band(P) 0.0 to 100.0%
    Intergral time(l) 0 to 3600 sec.
    Derivative time(D) 0 to 3600 sec.
    Control time(T) 1 to 120 sec.
    Sampling period 0.5 sec.
    LBA setting 1 to 999 sec.
    RAMP setting Ramp Up, Ramp Down at 1 to 99min.
    Dielectric strength 2,000VAC 50/60Hz for 1min. (between power source terminal and input terminal)
    Vibration 0.75mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours
    Relay life cycle Main output Mechanical : Min. 10,000,000 operations, Electrical : Min. 100,000 operations(250VAC 3A resistive load)
    Sub output Mechanical : Min. 20,000,000 operations, Electrical : Min. 500,000 operations(250VAC 1A resistive load)
    Insulation resistance Min. 100MΩ(at 500VDC megger)
    Noise ±2kV the square wave noise (pulse width: 1us) by the noise simulator
    Memory protection Approx. 10years(When using non-volatile semiconductor memory)
    Environment Ambient temperature -10 to 50°C, storage: -20 to 60°C
    Ambient humidity 35 to 85%RH, storage: 35 to 85%RH
    Approval CE, UL, RoHS(TZN4S)
    Unit weight TZ4SP: Approx. 136g
    TZN4S: Approx. 150g
    Approx. 136g Approx. 270g TZ4W: Approx. 270g TZN4W: Approx. 259g Approx. 259g Approx. 360g
    Document download

    ¶ 1. AC/DC power type is only for TZ4SP, TZ4ST, TZN4M, TZ4L Series.
    ¶ Environment resistance is rated at no freezing or condensation.

    Reviews

    Write a review