Model |
THD-R-PT |
THD-R-PT/C |
THD-R-C
THD-R-V
THD-R-T |
THD-D[ ]-[ ]
THD-W[ ]-[ ] |
THD-DD[ ]-[ ]
THD-WD[ ]-[ ] |
Display type |
- |
Non-indicating type |
7Segment LED display |
Display digit |
- |
- |
Each 3digits for
temp./ humidity |
Character size |
- |
- |
W6.2×H10.0mm |
Power supply |
- |
24VDC |
Allowable voltage range |
90 to 110% of rated voltage |
Power consumption |
- |
Max. 2.4W |
Measuring input |
Temperature
(Built-in sensor) |
Temperature, Humidity(Built-in sensor) |
Output¶ 1 |
Temp. |
DPt100Ω resistance value |
DC4-20mA, 1-5VDC,
RS485 communication output(Modbus RTU) |
Humidity |
- |
DC4-20mA |
Measurement
range |
Temp. |
-19.9 to 60.0°C |
Humidity |
- |
0.0 to 99.9%RH(THD-R is required to attend for using over 90%RH.) |
Accuracy |
Temp. |
Max. ±0.8°C |
-19.9 to 5.0°C : Max. ±1.0°C, 5.0 to 40.0°C : Max. ±0.5°C,
40.0 to 60.0°C : Max. ±1.0°C rdg ±1digit(At below -10ºC, within 1.5°C) |
Humidity |
- |
Max. ±3%RH at 30 to 70%RH
(at 25 to 45°C) |
Sampling cycle |
- |
Fixed in 0.5 sec. |
Insulation resistance |
- |
Min. 100MΩ(at 500VDC megger) |
Dielectric strength |
- |
500VAC 50/60Hz for 1 minute |
Noise strength |
- |
±0.3kV the square wave noise(pulse width:1µs) by the noise simulator |
Vibration |
Mechanical |
- |
0.75mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 1hour |
Malfunction |
- |
0.5mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 10min. |
Shock |
Mechanical |
- |
300m/s²(approx. 30G) in each of X, Y, Z directions for3 times |
Malfunction |
- |
100m/s²(approx. 10G) in each of X, Y, Z directions for 3 times |
Protection |
IP10 |
IP65(Except sensing part) |
Ambient temperature |
-20 to 60°C, storage : -20 to 60°C |
Cable |
Terminal type |
4-wire, ø4, Length: 2m |
Approval |
CE |
Unit weight |
Approx. 55g |
Approx. 160g |
Document download |
|
¶ 1. The allowable impedance of current output is max. 600Ω
¶ Environment resistance is rated at no freezing or condensation.
.