Description
Main features
Available to set 6 digits(0.00001 to 999999) prescale value(4digit : 0.001 to 9999) Built-in Modbus communication function(Communication model) Available to set the One-Shot output time in 10ms.(0.01sec. to 99.99sec.) Increase contact capacity to 5A(CTS, CTM Series) Available to set Count Start Point.(Initial value) Improved to select memory protection function in the indicator Added BATCH counter function(CTM Series) Added Counter Up-1 / Up-2 / Down-1 / Down-2 input modes Added Counter TOTAL / HOLD operation modes in the indicator Added Timer TOTAL / HOLD / On Time Display operation modes in the indicator Added Timer INT2 / NFD / NFD.1 / INTG output modes Added Timer range 999.999s / 9999m59 / 99999.9h 
Specifications
| Series | CTS | CTY | CTM | |||
| Digit | 4 | 6 | 6 | 6 | ||
| Model | Dual Preset | CT4S-2PÈ· È· | CT6S-2PÈ· È· | CT6Y-2PÈ· È· | CT6M-2PÈ· È· | |
| Sinqle Preset | CT4S-1PÈ· È· | CT6S-1PÈ· È· | CT6Y-1PÈ· È· | CT6M-1PÈ· È· | ||
| Indicator | - | CT6S-1È· È· | CT6Y-1È· È· | CT6M-1È· È· | ||
| Digit Size | Count value | 11mm | 10mm | 10mm | 13mm | |
| Preset value | 8mm | 7mm | 7mm | 9mm | ||
| Power Supply | AC Power | 100-240VAC 50/60HZ | ||||
| AC/DC Power | 24VAC 50/60HZ / 24-48VDC | |||||
| Allowable voltage range | 90 to 110% of rated voltage(AC Power type) | |||||
| Power consumption | AC Power | Max. 12VA | ||||
| AC/DC Power | AC: Max. 10VA / DC: Max. 8W | |||||
| INA/INB Max. counting speed | Selectable 1cps / 30cps / 1kcps / 5kcps / 10kcps | |||||
| Min. input signal width |
Counter | Reset signal : Selectable 1ms, 20ms | ||||
| Timer | INA, INB RESET : Selectable 1ms, 20ms | INA, INH, RESET, INHIBIT, BATCH RESET : Selectable 1ms, 20ms |
||||
| Input | Selectable voltage input or No-voltage input [Voltage input] Input impedance is 5.4kΩ, 'H' level : 5-30VDC, 'L' level : 0-2VDC [No-voltage input] Short-circuit impedance : Max. 1kΩ, Residual voltage : Max. 2VDC |
|||||
| One-shot output | Count, timer : Selectable 0.01s to 99.99s | |||||
| Control output | Without com. | Contact output | Dual preset : SPST(1a) 2EA Single preset : SPDT(1c) 1EA |
Dual preset : SPST(1a) 1EA, SPDT(1c) 1EA Single preset : SPDT(1c) 1EA |
||
| Solid state output | Dual preset : 1NPN open collector Single preset : 1NPN open collector |
Dual preset:3NPN open collector Single preset:2NPN open collector |
||||
| Com. | Contact output | Dual preset : SPST(1a)2EA Single preset : SPDT(1c)1EA |
Dual preset: SPSTMa), SPDT(1c) Single preset: SPDT(1c) |
|||
| Solid state output | - | Dual preset: - Sinqle preset:1NPN open collector |
Dual preset:2NPN open collector Sinqle preset:2NPN open collector |
|||
| Capacity | Contact output | 250VAC 5A resistive load | 250VAC 3A resistive load | 250VAC 5A resistive load | ||
| Solid state output | 30VDC Max. 100mA Max. | |||||
| External sensor power | 12VDC ±10%, 100mA Max. | |||||
| Memory retention | 10years(When using non-volatile semiconductor memory type) | |||||
| Timer | Repeat error | Power ON Start : Max. ±0.01% ±0.05 sec Signal Start : Max. ±0.01% ±0.03 sec |
||||
| SET error | ||||||
| Voltage error | ||||||
| Temperature error | ||||||
| Insulation resistance | Min. 100MΩ(500VDC Megger) | |||||
| Dielectric strength | 2.000VAC 50/60Hz for 1 minute | |||||
| Noise strength (AC Power) | ±2kV the square wave noise(pulse width:1µs) by the noise simulator | |||||
| Vibration | Mechanical | 0.75mm amplitude at frequency of 10 to 55(for 1 min.)Hz in each of X, Y, Z directions for 1 hour | ||||
| Malfunction | 0.5mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 10 minutes | |||||
| Shock | Mechanical | 300m/s²(Approx. 30G) in each of X, Y, Z directions for 3 times | ||||
| Malfunction | 100m/s²(Approx. 10G) in each of X, Y, Z directions for 3 times | |||||
| Relay Life cycle | Mechanical | Mln. 10,000,000 operations | ||||
| Electrical | Mln. 100,000 operations | |||||
| Protection | IP65(Front panel only) | |||||
| Environ-ment | Ambient temperature | -10 to 55°C, storage : -25 to 65°C(at non-freezing status) | ||||
| Ambient humidity | 35 to 85%RH, storage : 35 to 85%RH(at non-freezing status) | |||||
| Approval | CE,UL | |||||
| Unit weight | Approx. 159g | Approx. 149g | Approx. 253g | |||
| Document download |  |
|||||
