Description
Specifications
| Model | ATE - ⇽s / ⇽m / ⇽h | ATE1 - ⇽s / ⇽m / ⇽h | ATE2 - ⇽s / ⇽m / ⇽h | |
| Function | Power ON Delay | |||
| Control time setting range | sec.(1, 3, 6, 10, 30, 60), min.(3, 6, 10, 30, 60), hour(3, 6, 12 ,24) | |||
| Power supply | 110/220VAC 50/60Hz | 110VAC, 220VAC 50/60Hz, 12VDC, 24VDC(Option) | ||
| Allowable voltage range | 90 to 110% of rated voltage | |||
| Power consumption | Approx. 10VA(240VAC 60Hz), Approx. 2W(24VDC, 12VDC) | |||
| Reset time | Max. 200ms | |||
| Timing operation | Power ON start type | |||
| Control output | Contact type | Time limit SPDT(1c), Instantaneous SPST(1a) | Time limit DPDT(2c) | Time limit SPDT(1c), Instantaneous SPDT(1c) |
| Contact capacity | 250VAC 3A resistive load | |||
| Relay | Mechanical | Min. 10,000,000 operations | ||
| life cycle | Electrical | Min. 100,000 operations(250VAC 3A resistive load) | ||
| Repeat error | Max. ±0.3% | |||
| SET error | Max. ±5% ±0.05sec. | |||
| Voltage error | Max. ±0.5% | |||
| Temperature error | Max. ±2% | |||
| Insulation resistance | 100MΩ(at 500VDC megger) | |||
| Dielectric strength | 2000VAC 50/60Hz for 1 minute | |||
| Noise strength | ±2kV the square wave noise(pulse width : 1µs) by the noise simulator | |||
| Vibration | Mechanical | 0.75mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 1 hours | ||
| Malfunction | 0.5mm amplitude at frequency of 10 to'55Hz(for 1 min.) in each of X, Y, Z directions for 10 minutes | |||
| Shock | Mechanical | 300m/s²(approx. 30G) in each of X, Y, Z directions for 3 times | ||
| Malfunction | 100m/s²(approx. 10G) in each of X, Y, Z directions for 3 times | |||
| Environ-ment | Ambient temperature | -10 to 55°C, storage: -25 to 65°C | ||
| Ambient humidity | 35 to 80%RH | |||
| Unit weight | Approx. 75g | |||
| Document download |  |
|||
