Description
Specifications
| Model | AT8PSN-[ ] | AT8PMN-[ ] | |
| Function | Power OFF Delay | ||
| Control time setting range | 0.05 to 10 sec. | 0.05 to 10 min. | |
| Power supply | •100-120VAC 50/60Hz • 200-240VAC 50/60Hz • 100/110VDC • 24VAC 50/60Hz, 24VDC |
||
| Allowable voltage range | 90 to 110% of rated voltage | ||
| Power consumption | • 100-120VAC : 1.5VA • 200-240VAC : 1.5VA • 100/110VDC : 0.8W • 24VDC : 0.2VA, 24VDC 0.2W |
||
| Timing operation | Power OFF start type | ||
| Control output | Contact type | Time limit DPDT(2c) | |
| Contact capacity | 250VAC 3A resistive load | ||
| Relay life cycle | Mechanical | Min.10,000,000 operations | |
| Electrical | Min. 100,000 operations(250VAC 3A resistive load) | ||
| Repeat error | Max. ±0.2% ±10ms | ||
| Setting error | Max. ±5% ±50ms | ||
| Voltage error | Max. ±0.5% | ||
| Temperature error | Max. ±2% | ||
| Insulation resistance | 100MΩ(at 500VDC megger) | ||
| Dielectric strength | 2000VAC 50/60Hz for 1 minute | ||
| Noise strength | ±2kV the square wave noise(pulse width : 1µs) by the noise simulator | ||
| Vibration | Mechanical | 0.75mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 1 hours | |
| Malfunction | 0.5mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 10 minutes | ||
| Shock | Mechanical | 300m/s²(approx. 30G) in each of X, Y, Z directions 3 times | |
| Malfunction | 100m/s²(approx. 10G) in each of X, Y, Z directions 3 times | ||
| Environment | Ambient temperature | -10 to 55°C, storage: -25 to 65°C | |
| Ambient humidity | 35 to 85%RH, storage: 35 to 85%RH | ||
| Approval | CE, UL | ||
| Accessory | Bracket | ||
| Unit weight | Approx. 100g | ||
| Document download |  |
||
