Model |
PMC-1 HS-232 |
PMC-1 HS-USB |
PMC-2HS-232 |
PMC-2HS-USB |
Control axis |
1-Aixs |
2-Aixs (Each axis can be independently programmed) |
Motor for control |
Pulse string input stepping motor or servo motor |
Power supply |
24VDC ±10% |
Power consumption |
Max. 6W |
Operation mode |
Scan / Continuous / Index / Program |
Positioning type |
Absolute position / Incremental position |
Index step numbers |
64 indexes per each axis |
Positioning range |
-8,388,608 to 8,388,607(Available pulse scaling function) |
Drive speed numbers |
4EA |
Drive speed |
1 pps to 4 Mpps(1 to 8,000 x Magnification 1 to 500) |
Output pulse type |
2 Pulse output(Llne driver) |
Home search mode |
High speed near home search(Stepl) -> Low speed home search(Step2) -> Low speed encoder Z-phase search(Step3) -> High speed offset movement(Step4) Configuring the detection method and Enable/Disable in each step. |
Program function |
Memory |
EEPROM |
Step |
64 Steps |
Control |
ABS, INC, HOM, UP, OUT, OTP, JMP, REP, RPE, END, TIM, NOP(12 EA) |
Start |
Power ON program auto-start function |
Home search |
Power ON home search auto-start function |
Teaching unit (Sold separately) |
Adding operation mode, parameter, program drive handling (Scan operation, program execution, home search, etc) |
Common output |
1 point |
2 point |
Control interface |
Parallel l/F |
Environ-ment |
Ambient temperature |
0 to 45°C |
Ambient humidity |
35 to 85%RH |
Accessory |
Common |
User Manual & CD |
Power connector |
CN1 : MC1,5/2-ST-3.5(PHOENIX) 1EA |
RS232C connector |
CN2 : RS-232C communication cable(1.5m) 1EA |
P l/F connector |
CN3 : 20P MIL standard, 2.54mm connector 1EA |
X axis input/ output connector |
CN4 : 16P MIL standard, 2.54mm connector 1EA(2HS : 2EA) |
Y axis input/ output connector |
- |
CN5 : 16P MIL standard, 2.54mm connector 1 |
USB connector |
- |
USB communication cable(1m) 1EA |
- |
USB communication cable(1m) 1EA |
Unit weight |
Approx. 96g |
Approx. 102g |
Document download |
|