Description
Specifications
| Model | DC 2-wire type | DC 3-wire type | |||
| PRDT12-4⇾O PRDT12-4⇾C PRDT12-4⇾O-V PRDT12-4⇾C-V PRDLT12-4⇾O PRDLT12-4⇾C PRDLT12-4⇾O-V PRDLT12-4⇾C-V PRDWT12-4⇾O PRDWT12-4⇾C PRDWT12-4⇾O-I PRDWT12-4⇾C-I PRDWT12-4⇾O-IV PRDWT12-4⇾C-IV |
PRDT12-8⇾O PRDT12-8⇾C PRDT12-8⇾O-V PRDT12-8⇾C-V PRDLT12-8⇾O PRDLT12-8⇾C PRDLT12-8⇾O-V PRDLT12-8⇾C-V PRDWT12-8⇾O PRDWT12-8⇾C PRDWT12-8⇾O-I PRDWT12-8⇾C-I PRDWT12-8⇾O-IV PRDWT12-8⇾C-IV |
PRD12-4DN PRD12-4DP PRD12-4DN2 PRD12-4DP2 PRDL12-4DN PRDL12-4DP PRDL12-4DN2 PRDL12-4DP2 PRDW12-4DN PRDW12-4DP PRDW12-4DN2 PRDW12-4DP2 PRDW12-4DN-V PRDW12-4DP-V PRDWL12-4DN PRDWL12-4DP PRDWL12-4DN2 PRDWL12-4DP2 |
PRD12-8DN PRD12-8DP PRD12-8DN2 PRD12-8DP2 PRDL12-8DN PRDL12-8DP PRDL12-8DN2 PRDL12-8DP2 PRDW12-8DN PRDW12-8DP PRDW12-8DN2 PRDW12-8DP2 PRDW12-8DN-V PRDW12-8DP-V PRDWL12-8DN PRDWL12-8DP PRDWL12-8DN2 PRDWL12-8DP2 |
||
| Sensing distance | 4mm | 8mm | 4mm | 8mm | |
| Hysteresis | Max. 10% of sensing distance | ||||
| Standard sensing target | 12x12x1mm (lron) |
25x25x1 mm (Iron) |
12x12x1mm (lron) |
25x25x1 mm (Iron) |
|
| Sensing distance | 0 to 2.8mm | 0 to 5.6mm | 0 to 2.8mm | 0 to 5.6mm | |
| Power supply (Operating Voltage) | 12-24VDC (10-30VDC) | ||||
| Leakage current | Max. 0.6mA | - | |||
| Current consumption | - | Max. 10mA | |||
| Response frequency† 1 | 450Hz | 400Hz | 500Hz | 400Hz | |
| Residual Voltage† 2 | Max. 3.5V(for non-polarity type, max. 5V) | Max. 1.5V | |||
| Affection by Temp. | Max. ±10% for sensing distance at ambient temperature 20°C | ||||
| Control output | 2 to 100mA | 200mA | |||
| Insulation resistance | Min. 50MΩ(at 500VDC megger) | ||||
| Dielectric strength | 1500VAC 50/60Hzfor 1 minute | ||||
| Vibration | 1mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours | ||||
| Shock | 500m/s²(approx. 50G) X, Y, Z directions for 3 times | ||||
| Indicator | Operation indicator(red LED) | ||||
| EnVironment | Ambient temperature | -25 to 70°C, Storage : -30 to 80°C | |||
| Ambient humidity | 35 to 95%RH, Storage :35 to 95%RH | ||||
| Protection circuit | Surge protection circuit, ReVerse polarity proteciton circuit, OVercurrent protection circuit | ||||
| Material | Case/Nut: Nickel plated Brass, Washer: Nickel plated Iron, Sensing surface: Heat-resistant ABS, Standard cable(Black): PolyVinyl chloride(PVC), Oil resistant cable(Gray): Oil resistant PolyVinyl chloride(PVC) |
||||
| Cable | ø4, 2-wire, 2m | ||||
| (For cable type, 300mm, M12 connector), (AWG22, Core diameter: 0.08mm, Number of cores: 60, Insulator diameter: ø1.25) | |||||
| ApproVal | CE | ||||
| Protection | IP67(IEC Standard) | ||||
| Unit weight | PRDT: Approx. 74g PRDLT: Approx. 94g PRDWT: Approx. 44g |
PRDT: Approx. 72g PRDLT: Approx. 92g PRDWT: Approx. 42g |
PRD:? Approx. 74g PRDL:? Approx. 94g PRDW:? Approx. 44g PRDWL:? Approx. 64g |
PRD:? Approx. 72g PRDL:? Approx. 92g PRDW:? Approx. 42g PRDWL:? Approx. 62g |
|
| Document download |  |
||||
† 2: Before using non-polarity type, check the condition of connected diVice because residual Voltage is 5V.
† The '⇾' of model name is for power type. 'D' is 12-24VDC, 'X' is non-polarity12-24VDC.
† The last 'V' of model name is for the model with oil-resistance reinforced cable.
† EnVironment resistance is rated at no freezing or condensation.
