Autonics Proximity Sensor, 15mm Sensing, M30 Round, Non-Shielded, NC, 2 Wire, 2m cable, 90-250 VAC

$91.00

Model Number:
CR30-15AC
Availability:
111
Brand:
AUTONICS

Not yet rated Write a review

Description

CR Series features electric capacitive type proximity sensors. These sensors will detect a wide variety of materials with permittivity and can not only detect conductive materials such as iron and metal but also nonconductive materials such as plastic, water, stone and wood. Moreover, built-in sensitivity volume allows users to apply in a diverse area for user convenience.

Main Features

● Sensing of iron, metal, plastic, water, stone, wood etc.
● Long life cycle and high reliability
● DC type: Built-in surge protection circuit, reverse polarity protection circuit AC type: Built-in surge protection circuit
● Easy to adjust of the sensing distance with sensitivity adjuster
● Red LED operation indicator
● Easy to control of level and position

.

Specifications

Model CR18-8DN
CR18-3DP
CR18-8DN2
CR30-15DN
CR30-15DP
CR30-15DN2
CR18-8AO
CR18-8AC
CR30-15AO
CR30-15AC
Sensing distance 8mm 15mm 8mm 15mm
Hysteresis Max. 20% of sensing distance
Standard sensing target 50x50x1mm(lron)
Sensing distance 0 to 5.6mm 0 to 10.5mm 0 to 5.6mm 0 to 10.5mm
Power supply
(Operating voltage)
12-24VDC( 10-30VDC) 100-240VAC 50/60Hz(85-264VAC)
Current consumption Max. 15mA -
Leakage current - Max. 2.2mA
Response frequency† 1 50 Hz 20 Hz
Residual voltage Max. 1.5V Max. 20V
Affection by Temp. Max. ±10% for sensing distance at ambient temperature 20°C
Control output Max. 200mA
Insulation resistance Min. 50MΩ(at 500VDC megger)
Dielectric strength 1500VAC 50/60Hz for 1 minute
Vibration 1mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours
Shock 500m/s²(approx. 50G) in each of X, Y, Z directions for 3 times
Indicator Operation indicator(red LED)
Environment Ambient temperature -25 to 70°C, storage : -30 to 80°C
Ambient humidity 35 to 95% RH, storage :35 to 95% RH
Protection circuit Reverse polarity protection, Serge protection Serge protection circuit
Protection IP66(IEC standard) IP65(IEC standard) IP66(IEC standard) IP65(IEC standard)
Cable ø4, 3-wire, 2m ø5, 3-wire, 2m ø4, 2-wire, 2m ø5, 2-wire, 2m
(AWG22, Core diameter: 0.08mm, Number of cores: 60, Insulator out diameter: ø1.25)
Material Case/Nut: Nikel plated Brass, Washer: Nikel plated Iron, Sensing surface: PBT,
Standard cable(Black): Polyvinyl chloride(PVC), Oil resistant cable(Gray): Oil resistant Polyvinyl chlorde(PVC)
Approval RoHS
Weight† 2 Approx. 64g(Approx. 52g) Approx.84g(Approx. 72g)
Document download
† 1: The response frequency is the average value. The standard sensing target is used and the width is set as 2 times of the standard sensing target, 1/2 of the sensing distance for the distance.
† 2: The weight with packaging and the weight in parentheses is only unit weight.
† Environment resistance is rated at no freezing or condensation.




Dimensions




Connections

Reviews

Write a review