Description
Specifications
| Model | NPN open collector output | BUP-30 | BUP-30S | BUP-50 | BUP-50S |
| PNP open collector output | BUP-30-P | BUP-30S-P | BUP-50-P | BUP-50S-P | |
| Sensing type | Through-beam | ||||
| Sensing target | Opaque materialsof min. Ø4mm | Opaque materialsof min. Ø1.5mm | Opaque materialsof min. Ø4mm | Opaque materialsof min. Ø1.5mm | |
| Operation mode | Selectable Light ON or Dark ON by control wire | ||||
| Sensing distance | 30mm | 50mm | |||
| Response time | Max. 1ms | ||||
| Power supply | 12-24VDC ±10%(Rlpple P-P : Max. 10%) | ||||
| Current consumption | Max. 30mA | ||||
| Light source | Infrared LED(940nm) | ||||
| Sensitivity adjustment | Fixed | Adjustment VR | Fixed | Adjustment VR | |
| Control output | NPN or PNP open collector output • Load voltage : Max. 30VDC • Load current : Max. 200mA • Residual voltage - NPN : Max. 1V, PNP : Max. 2.5V |
||||
| Protection circuit | Reverse polarity protection, Output short-circuit protection | ||||
| Indication | Power indicator : green LED, Operation Indicator : red LED | ||||
| Connection | Outgoing cable | ||||
| Insulation resistance | Min. 20MΩ(at 500VDC megger) | ||||
| Noise strength | ±240V the square wave noise(pulse width: 1µs) by the noise simulator | ||||
| Dielectric strength | 1,000VAC 50/60Hz for 1 minute | ||||
| Vibration | 1.5mm amplitude or 300m/s2 at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours | ||||
| Shock | 500m/s²(approx. 50G) in each of X, Y, Z directions for 3 times | ||||
| Environment | Ambient illumination | Sunlight : Max. 11,000lx Incandescent lamp : Max. 3,000lx(Receiving illumination) | |||
| Ambient temperature | -25 to 65°C[BUP-30S(-P) & BUP-50S(-P) : -10 to 60°C], storage: -25 to 70°C | ||||
| Ambient humidity | 35 to 85%RH, storage : 35 to 85%RH | ||||
| Protection | IP66(IEC standard) | IP50(IEC standard) | IP66(IEC standard) | IP50(IEC standard) | |
| Material | Case: ABS, Cap: PC | ||||
| Cable | Ø4, 4-wire, Length : 2m (AWG22, Core diameter : 0.08mm, Number of cores : 60, Insulation out diameter : Ø1.25) | ||||
| Accessory | - | VR adjustment driver | - | VR adjustment driver | |
| Approval | CE | ||||
| Unit weight | Approx. 90g | Approx. 140g | |||
| Document download |  |
||||
Dimensions
Connections
