Description
Specifications
| Model | NPN open collector output | BWPK25-05 |
| PNP open collector output | BWPK25-05P | |
| Sensing type | Through-beam | |
| Sensing distance | Long distance mode | 0.1 to 3m |
| Short distance mode | 0.05 to 1m | |
| Sensing target | Opaque materials of Min.Ø35mm | |
| Optical axis pitch | 25mm | |
| Number of optical axis | 5pcs | |
| Sensing width | 100mm | |
| Power supply | 12-24VDC ±10%(Ripple P-P : Max. 10%) | |
| Current consumption | Emitter : Max. 60mA, Receiver : Max. 60mA | |
| Control output | NPN or PNP open collector output • Load voltage : Max. 30VDC • Load current : Max. 150mA • Residual voltage - NPN : Max. 1V, PNP : Min.2.5V |
|
| Operation mode | Selectable Light ON/Dark ON by switch | |
| Response time | Max. 30ms | |
| Light source | Infrared LED(850nm modulated) | |
| Interference protection | Interference protection by transmission frequency selection | |
| Protection circuit | Reverse power polarity, Output short-circuit(Overcurrent) protection | |
| External picking input | Non-contact or contact input • NPN open collector output : Lighting(0-2V), Light out(5-30V or open) • PNP open collector output : Lighting(4-30V), Light out(0-3V or open) |
|
| Environment | Ambient illumination | Sunlight : Max. 10,000lx, Incandescent lamp : Max. 3,000lx (received light side illumination) |
| Ambient temperature | -10 to 55°C, storage : -20 to 60°C | |
| Ambient humidity | 35 to 85%RH, storage : 35 to 85%RH | |
| Insulation resistance | Min. 20MΩ(at 500VDC megger) | |
| Noise strength | ±240V the square wave noise (pulse width: 1µs) by the noise simulation | |
| Dielectric strength | 1,000VAC 50/60Hz for 1 minute | |
| Vibration | 1,5mm amplitude at frequency of 10 to 55Hz(for 1 min.) In each of X, Y, Z directions for 2 hours | |
| Shock | 500m/s²(approx. 50G) in each of X, Y, Z directions for 3 times | |
| Protection | IP40(IEC standard) | |
| Material | Case : PC/ABS, Sensing part: PMMA | |
| Cable | Ø4.0, 4-wire, Length : 2m(Emitter : Ø4.0, 3-wire, Length : 2m) (AWG 22, Core diameter : 0.08mm, Number of cores : 60, Insulator out diameter : Ø1.25) |
|
| Approval | CE | |
| Unit weight | Approx. 250g | |
| Document download |  |
|
Dimensions
Connections
