Description
Specifications
| Series | MP5S-4N | MP5Y-24 | MP5Y-4⋲ | MP5W-4⋲ | |
| Display method | 7 Segment LED display(Zero blanking type) | ||||
| Character size | W4 x H8mm | W6.8 x H13.8mm | |||
| Max. indication | -19999 to 99999 | ||||
| Power supply | 100-240VAC 50/60Hz | 24VDC | 100-240VAC 50/60Hz | 100-240VAC 50/60Hz | |
| Allowable operation voltage | 90 to 110% | ||||
| Power consumption | Max. 7.5VA | Max. 6W | Max. 7VA | Max. 6VA | |
| Power for external sensor | 12VDC ±10%, 80mA | ||||
| Input frequency | • Solid-state Input: Max. 50kHz(Pulse width : Each over 10µs) • Contact input: Max. 45Hz(Pulse width : Over 11ms) |
||||
| Input level | [Voltage input] High : 4.5-24VDC, Low : 0-1.0VDC, Input Impedance : 4.5kΩ [No-voltage Input] Impedance at short-circuit: Max. 300Ω, Residual voltage : Max. 1V, Impedance at open-circuit: Min. 100kΩ |
||||
| Measuring range | • Mode F1, F2, F7, F8, F9, F10 : 0.0005Hz to 50kHz • Mode F3 : 0.02s to 3,200s • Mode F4, F5, F6 : 0.01s to 3,200s • Mode F11, F12, F13 : 0 to 4 x 10 Count |
||||
| Measuring accuracy (23 ±5°C) |
• Mode F1, F2, F7, F8, F9, F10 : F.S. ±0.05% rdg ±1digit • Mode F3, F4, F5, F6 : F.S. ±0.01% rdg ±1 digit |
||||
| Display period | 0.05 / 0.5 /1 / 2 / 4 / 8sec.(lt Is same with period of output update.) | ||||
| Operation mode | Number of revolution/Speed/Frequency(F1), Passing speed(F2), Cycle(F3), Passing time(F4), Time width(F5), Time defference(F6), Absolute ratio(F7), Error ratio(F8), Density(F9), Error(F10), Length measurement(F11), lnterval(F12), Multiplication(F13) † Refer to the M-20 to 23 for the operation mode. |
||||
| Prescale function | Direct Input method(0.0001x10-9 to 9.9999x109) | ||||
| Hysteresis† 1 | 0 to 9999 | ||||
| Other functions | • Lock setting function • Auto-Zero time setting function • Time unit selection function • Peak value monitoring function • Memory protection function (Mode F13 applied only) |
• Lock setting function • Monitoring delay functionUAuto-zero time setting function • Current output range selectlon(Current output type only) • Comparative output function(HH, H, GO, L, LL) • Time unit selection function • Deviation memory function(F output mode applied only) • Peak value monitoring function • Remote/Local switching function(Communicatlon output type only) • Data bank switching function† 2 • Memory protection function(Mode F13 applied only) |
|||
| Main output | Triple relay | - | - | 250VAC 3A resistive load Quintuple relay 3a |
|
| Quintuple relay | |||||
| NPN Open collector (Quintuple) | 12-24VDC 30mA Max. | 12-24VDC 20mA max. | |||
| PNP Open collector (Quintuple) | |||||
| Sub output | BCD Dynamic | - | NPN Open collector 12-24VDC 30mA Max. |
NPN Open collector 12-24VDC 20mA max. |
|
| Low speed serial output | - | - | |||
| PV transmission | - | DC4-20mA Load 600Ω Max. (Response time : Max. 800ms) | DC4-20mA Load 600Ω Max. | ||
| RS485 communication | - | 31 channels, Mutual direction communication function | |||
| Memory protection | Non-volatile memory(lnput: Min. 100,000 times) | ||||
| Insulation resistance | Min. 100MΩ(at 500VDC megger) Between charge part and non-charge part | ||||
| Dielectric stength | 2000VAC 60Hz 1minute(Between terminals of AC power and case, Between terminals of AC power and measuring input terminals) |
||||
| Impulse noise stength | ±2000VAC R-phase, S-phase the square wave noise(pulse width : 1µs) by the noise simulator, repeat frequency 60Hz | ||||
| Vibration | Mechanical | 0.75mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hour | |||
| Malfunction | 0.5mm amplitude at frequency of 10 to 55Hz(for 1 mln.) in each of X, Y, Z directions for 10 minutes | ||||
| Shock | Mechanical | 300m/s²(approx. 30G) in each of X, Y, Z directions for 3 times | |||
| Malfunction | 100m/s²(approx. 10G) in each of X, Y, Z directions for 3 times | ||||
| Relay life cycle | Malfunction | - | Min. 10,000,000 operations | ||
| Mechanical | - | Min. 100,000 operations(250VAC 3Aload current) | |||
| Environ -ment | Ambient temperature | -10 to 50°C, storage : -20 to 60°C | |||
| Ambient humidity | 35 to 85%RH, storage : 35 to 85%RH | ||||
| Unit weight | Approx. 199.5g (approx. 141.5g) |
Approx. 209g (approx. 117g) |
Approx. 301.5g (approx. 177g) |
||
| Approval | CE, UL | - | CE, UL | CE, UL | |
| Document download |  |
||||
† 2: Data bank switching function Is In MP5W series only.
† 3: The weight with packaging and the weight in parentheses is only unit weight.
