Autonics Fiber Optic Amplifier, Dual-display, Auto Tune, NPN Output, 12-24 VDC (fiber req'd)..

$182.00

Model Number:
BF5R-D1-N
Availability:
37
Brand:
AUTONICS

Not yet rated Write a review

Description

BF5 series are fiber optic amplifiers sensing high-speed moving and tiny objects by achieving the highest resolution power 1/10,000 and high speed detection of up to 20,000 times per sec. The series realizes economical solutions and superior sensing performance with special features including side-connector power supplying, amplifier unit communication, automatic channel array and mutual interference prevention up to 8 channels. Green / Blue source type and PNP control output are newly added features of BF5 series.

Main Features

● Dual-display for light incident level and setting value(BF5□-D)
● Minute object sensing available with 1/10,000 high resolution
● Enables to detect with high-speed(20,000 times per sec.) moving objects
● 5 response speeds
   : Ultra fast mode(50㎲), high speed mode(150㎲),standard mode(500㎲), long distance mode(4ms), Ultra long distance mode(10ms)
● Long lasting amplifier regardless of element’s life degradation or temperature change
● Multiple sensitivity setting modes available
   : auto tuning, 1 point(maximum sensitivity), 2 point, positioning teaching
● Up to 8 units enable to stack with mutual interference prevention function using side connectors
● Auto channel setting function for multiple installations
● Slim design(W10×H30×L70mm)

.

Specifications

Display type Dual Display type Single Display type
Model NPN open collector output BF5R-D1-N BF5G-D1-N BF5B-D1-N BF5R-S1-N
PNP open collector output BF5R-D1-P BF5G-D1-P BF5B-D1-P BF5R-S1-P
Light source Red LED
(660nm, modulated)		 Green LED
(530nm, modulated)		 Blue LED
(470nm, modulated)		 Red LED
(660nm, modulated)
Power supply 12-24VDC±10%
Current consumption Max. 50mA
Operation mode Light ON / Dark ON Selectable
Control output NPN or PNP open collector
• Load voltage: Max. 24VDC
• Load current: Max. 100mA
• Residual voltage - NPN:Max. 1V, PNP:Max. 3V
Protection circuit Reverse poser polarity protection, Overcurrent protection, Surge absorption
Response time Ultra Fast : 50µs(only for dual display type), Fast : 150µs,STD : 500µs, Long : 4ms
Display method • Incident light level: Red, 4digit, 7Segment
• SV : Green, 4digit, 7Segment
• Main output Indicator: Red LED		 • Incident light level / SV : Red, 4diglt, 7Segment
• Main output indicator : Red LED
Display function Incident light level / SV display [4,000/10,000 resolution], Percentage display, High/Low peak value display, Normal / Reversed display (only for dual display type)
Sensitivity setting Manual sensitivity setting, teaching sensitivity setting
(Auto tuning, 1 point, 2 point teaching, positioning teaching)		 Manual sensitivity setting, teaching sensitivity setting
(auto tuning)
Mutual Interference prevention Max. 8 unit sets (Automatically set regardless of response time)
Initializing Initializing to factory mode -
Energy saving Normal / Energy saving 1 / Energy saving 2 -
Timer OFF, OFF Delay, ON Delay, One-shot OFF, 10ms OFF Delay timer, 40ms OFF Delay timer
Insulation resistance Min. 20MΩ(at 500VDC megger)
Dielectric strength 1.000VAC 50/60Hz for 1 min.
Vibration 1.5mm amplitude or 300m/s2 at frequency of 10 to 55Hz(for 1 min.) in each X, Y, Z directions for 2 hours
Shock 500m/s²(approx. 50G) in each X, Y, Z directions for 3 times
Environ-ment Ambient Illumination Incandescent lamp : Max. 3000lx Sunlight : Max. 11000lx(received illumination)
Ambient temperature -10 to 50°C, storage: -20 to 70°C
Ambient humidity 35 to 85%RH, storage: 35 to 85%RH
Protection IP40(IEC standards)
Material Case : PBT, Cover : PC
Fiber cable Tightening torque Min. 2kgf
Accessory Connector type wire(Ø4, 3-wire, 2m) (AWG22, Core diameter: 0.08mm, Number of cores: 60, Insulator out diameter: Ø1.25), Side connector
Approval CE
Unit weight Approx. 138g
Document download
† The temperature or humidity mentioned in Environment indicates a non freezing or condensation environment.



Dimensions






Connetion

Reviews

Write a review

Best Sellers

LED stack tower light, 56mm red/yellow/green color 3 stack modular, Steady, Pole mounting black body, 25" prewired, 24 VAC/DC

PTE-A-302-RYG-B

LED stack tower light, 56mm red/yellow/green color 3 stack modular, Steady, Pole mounting black body, 25" prewired, 24 VAC/DC

$115.95

Add to Cart
High intensity LED Indicator, 12mm Panel hole, Flat Head type, White, 12V DC

H12F-12W

High intensity LED Indicator, 12mm Panel hole, Flat Head type, White, 12V DC

$7.60

Add to Cart