Autonics Fiber Optic Amplifier, Auto Tune, PNP Output, Red LED, 12-24 VDC (fiber req'd)

$84.95

Model Number:
BF4RP
Availability:
735
Brand:
AUTONICS

Not yet rated Write a review

Description

BF4R, a high performance fiber optic amplifier, features a compact structure designed to fit into narrow spaces. This fiber optic amplifier has fast response speed of under 0.5ms, and can be compactly mounted. Also, external synchronization input function, mutual interference protection and self-diagnosis function enhance user experience.

Main Features

● High speed response : Max. 0.5ms
● Auto sensitivity setting(Button setting)/Remote sensitivity setting
● External synchronization input, mutual interference protection, self-diagnosis
● Reverse power polarity and short-circuit(Overcurrent) protection circuit
● Timer function : Selectable None / 40ms OFF Delay timer(fixed) (Standard type, remote sensitivity setting type only)
● Automatically selectable Light ON / Dark ON
● Precise detection of small target and complicated place to install

.

Specifications

Model Standard type External synchronization input type Remote sensitivity setting type
BF4RP BF4GP BF4R BF4G BF4R-E BF4G-E BF4R-R BF4G-R
Response frequency Max. 0.5ms(Frequency 1), Max. 0.7ms(Frequency 2)
Power supply 12-24VDC ±10%(Rlpple P-P: Max. 10%)
Current consumption Max. 45mA
Light source
(modulated light)
Red Green Red Green Red Green Red Green
Sensitivity adjustment Sensitivity adjustment button(ON/OFF)
Operation mode Automatic selection of Light ON/Dark ON accordance with button setting
Control output NPN or PNP open collector output
• Load voltage: Max. 30VDC
• Load current: Max. 100mA
• Residual voltage - NPN: Max. 1V(load current: 100mA), Max. 0.4V(load current:16mA) / PNP: Max. 2.5V
Self-diagnosis output ON state under unstable sensing(When the target stays for 300ms in unstable area),
ON state when control output short-circuited
• Load voltage: Max. 30VDC
• Load current: Max. 50mA
• Residual voltage - NPN: Max. 1V(load current: 50mA), Max. 0.4V(load current:16mA) / PNP: Max. 2.5V
Protection circuit Reverse power polarity, short-clrcult(overcurrent) protection circuit
Indicator Operation indicator: Red LED, Stability Indicator: Green LED ON when the target stays in stable sensing level
Input of stop transmission function - Built-in -
External synchronization function - Bullt-ln(Gate/Trigger) -
Remote sensitivity setting function - - Built-in
Interference prevention function†1 Built-in differential frequency mode (set by frequency 1 or 2 by ON/OFF button)
Timer function (selectable) Built-in OFF delay timer, Approx. 40ms fixed - Built-in OFF delay timer, Approx. 40ms fixed
Ambient illumination Sunlight : Max. 11,000lx, Incandescent lamp : Max. 3,000lx(Receiver illumination)
Noise resistance ±240V the square wave noise(pulse width : 1µs) by the noise simulator
Dielectric strength 1,000VAC 50/60Hz for 1 minute
Insulation resistance Min. 20MΩ(at 500VDC megger)
Vibration 1.5mm amplitude or 300m/s2 at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours
Shock 500m/s²(approx. 50G) in each of X, Y, Z directions for 3 times
Environment Ambient illumination Sunlight : Max. 11000lx, Incandescent lamp : Max. 3000lx (received illumination)
Ambient temperature -10 to 50°C, storage : -20 to 70°C
Ambient humidity 35 to 85% RH, storage :35 to 85% RH
Material Case : Heat-resistance ABS, Cover : PC
Cable Ø4, 4-wire, Length: 2m
(AWG22, Core diameter: 0.08mm, Number of cores: 60,
Insulator out diameter : Ø1.25)
Ø4, 6-wire, Length: 2m
(AWG24, Core diameter: 0.08mm, Number of cores: 40, Insulator out diameter : Ø1)
Accessory Mounting bracket, Bolts/nuts
Approval CE
Unit weight Approx. 65g
Document download
†1: Frequency 1(Normal mode) : Max. 0.5ms, Frequency 2 : Max. 0.7ms
† The temperature or humidity mentioned in Environment indicates a non freezing or condensation environment.

Reviews

Write a review