Autonics Photo Sensor, Polarized Retroreflective, 3m Sensing, Light & Dark On, NPN & PNP Output, 12-24 VDC

$66.95

Model Number:
BEN3M-PDT
Availability:
31
Brand:
AUTONICS

Not yet rated Write a review

Description

BEN Series is built-in amplifier type in a compact size. This type has an indicator to allow users to identify operation status of sensors from a long distance.

Main Features

● Small and power supply built-in type
● Easy installation with LED indicators on product
● Enables to set the operation mode by VR (Light ON/Dark ON)
● Status and output LED indication
● Built-in IC photo diode for ambient light and electrical noise 


Applications 

* Sensing for position, presence and absence of bottles in production lines


.

Specifications

Model BEN10M-TDT BEN5M-MDT BEN3M-PDT BEN300-DDT
Sensing type Through-beam Retroreflective Retroreflective
(with polarizing filter)
Diffuse reflective
Sensing distance 10m 0.1 to 5m † 1 0.1 to 3m † 1 300mm † 2
Sensing target Opaque materials of Min. ø16mm Opaque materials of Min. ø60mm Translucent,
Opaque materials
Hysteresis - Max. 20% at ratedsetting
distance
Response time Max. 1ms
Response time 12-24VDC ±10%(Ripple P-P: Max. 10%)
Current consumption Max. 50mA
Light source Infrared LED(850nm) Red LED(660nm) Infrared LED(940nm)
Sensitivity adjustment - Adjustment VR
Operation mode Selectable Light ON or Dark ON by VR
Control output NPN open collector / PNP open collector simultaneous output
• Load voltage: Max. 30VDC
• Load current: Max. 200mA
• Residual voltage - NPN: Max. 1V, PNP: Max. 2.5V
Protection circuit Reverse polarity protection, Short-circuit protection
Light receiving element Photo IC
Indicator Operation indicator : Red, Stability indicator : Green
(The red lamp on Emitter of transmitted beam type is for power indication)
Insulation resistance Min. 20MΩ(at 500VDC megger)
Noise resistance ±240V the square wave noise(pulse width: 1µs) by the noise simulator
Dielectric strength 1000VAC 50/60Hz for 1 minute
Vibration 1.5mm amplitude or 300m/s2 at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours
Shock 500m/s²(approx. 50G) in each of X, Y, Z directions for 3 times
Environ-ment Ambient illumination Sunlight: Max. 11,000 Ix Incandescent lamp : Max. 3,000 lx(Receiver illumination)
Ambient temperature -20 to 65°C, storage : -25 to 70°C
Ambient humidity 35 to 85%RH, storage : 35 to 85%RH
Protection IP50(IEC standard)
Material • Case, Case cover: Heat resistant ABS
• Sensing part: PC(with polarizing filter: PMMA)
Cable ø5, 4-wire, Length: 2m(Emitter of through-beam type: ø5, 2-wire, Length: 2m)
(AWG22, Core diameter: 0.08mm, Number of cores: 60, Insulator diameter: ø1.25)
Accessory Individual - Reflector(MS-2) -
Common VR adjustment driver, Mounting bracket, Bolts/nuts
Approval CE
Unit weight Approx. 342g Approx. 200g Approx. 187g
Document download
† 1: The sensing distance is specified with using the MS-2 reflector and same as the MS-4 reflector. Sensing distance is setting range of the reflector. The sensor can detect under 0.1m.
† 2: It is for Non-glossy white paper(100×100mm)
† The temperature or humidity mentioned in Environment indicates a non freezing or condensation environment.


Dimensions




Connections

Reviews

Write a review