Autonics Counter & Timer, 1/16 DIN, 4 digit LED, 1 preset, Relay & NPN Output, 100-240VAC

$110.95

Model Number:
CT4S-1P4
Availability:
421
Brand:
AUTONICS

Not yet rated Write a review

Description

Main features

  • Available to set 6 digits(0.00001 to 999999) prescale value(4digit : 0.001 to 9999)
  • Built-in Modbus communication function(Communication model)
  • Available to set the One-Shot output time in 10ms.(0.01sec. to 99.99sec.)
  • Increase contact capacity to 5A(CTS, CTM Series)
  • Available to set Count Start Point.(Initial value)
  • Improved to select memory protection function in the indicator
  • Added BATCH counter function(CTM Series)
  • Added Counter Up-1 / Up-2 / Down-1 / Down-2 input modes
  • Added Counter TOTAL / HOLD operation modes in the indicator
  • Added Timer TOTAL / HOLD / On Time Display operation modes in the indicator
  • Added Timer INT2 / NFD / NFD.1 / INTG output modes
  • Added Timer range 999.999s / 9999m59 / 99999.9h
  • .

    Specifications

    Series CTS CTY CTM
    Digit 4 6 6 6
    Model Dual Preset CT4S-2PÈ· È· CT6S-2PÈ· È· CT6Y-2PÈ· È· CT6M-2PÈ· È·
    Sinqle Preset CT4S-1PÈ· È· CT6S-1PÈ· È· CT6Y-1PÈ· È· CT6M-1PÈ· È·
    Indicator - CT6S-1È· È· CT6Y-1È· È· CT6M-1È· È·
    Digit Size Count value 11mm 10mm 10mm 13mm
    Preset value 8mm 7mm 7mm 9mm
    Power Supply AC Power 100-240VAC 50/60HZ
    AC/DC Power 24VAC 50/60HZ / 24-48VDC
    Allowable voltage range 90 to 110% of rated voltage(AC Power type)
    Power consumption AC Power Max. 12VA
    AC/DC Power AC: Max. 10VA / DC: Max. 8W
    INA/INB Max. counting speed Selectable 1cps / 30cps / 1kcps / 5kcps / 10kcps
    Min. input
    signal
    width
    Counter Reset signal : Selectable 1ms, 20ms
    Timer INA, INB RESET : Selectable 1ms, 20ms INA, INH, RESET, INHIBIT, BATCH
    RESET : Selectable 1ms, 20ms
    Input Selectable voltage input or No-voltage input
    [Voltage input] Input impedance is 5.4kΩ, 'H' level : 5-30VDC, 'L' level : 0-2VDC
    [No-voltage input] Short-circuit impedance : Max. 1kΩ, Residual voltage : Max. 2VDC
    One-shot output Count, timer : Selectable 0.01s to 99.99s
    Control output Without com. Contact output Dual preset : SPST(1a) 2EA
    Single preset : SPDT(1c) 1EA
    Dual preset : SPST(1a) 1EA, SPDT(1c) 1EA
    Single preset : SPDT(1c) 1EA
    Solid state output Dual preset : 1NPN open collector
    Single preset : 1NPN open collector
    Dual preset:3NPN open collector
    Single preset:2NPN open collector
    Com. Contact output Dual preset : SPST(1a)2EA
    Single preset : SPDT(1c)1EA
    Dual preset: SPSTMa), SPDT(1c)
    Single preset: SPDT(1c)
    Solid state output - Dual preset: -
    Sinqle preset:1NPN open collector
    Dual preset:2NPN open collector
    Sinqle preset:2NPN open collector
    Capacity Contact output 250VAC 5A resistive load 250VAC 3A resistive load 250VAC 5A resistive load
    Solid state output 30VDC Max. 100mA Max.
    External sensor power 12VDC ±10%, 100mA Max.
    Memory retention 10years(When using non-volatile semiconductor memory type)
    Timer Repeat error Power ON Start : Max. ±0.01% ±0.05 sec
    Signal Start : Max. ±0.01% ±0.03 sec
    SET error
    Voltage error
    Temperature error
    Insulation resistance Min. 100MΩ(500VDC Megger)
    Dielectric strength 2.000VAC 50/60Hz for 1 minute
    Noise strength (AC Power) ±2kV the square wave noise(pulse width:1µs) by the noise simulator
    Vibration Mechanical 0.75mm amplitude at frequency of 10 to 55(for 1 min.)Hz in each of X, Y, Z directions for 1 hour
    Malfunction 0.5mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 10 minutes
    Shock Mechanical 300m/s²(Approx. 30G) in each of X, Y, Z directions for 3 times
    Malfunction 100m/s²(Approx. 10G) in each of X, Y, Z directions for 3 times
    Relay Life cycle Mechanical Mln. 10,000,000 operations
    Electrical Mln. 100,000 operations
    Protection IP65(Front panel only)
    Environ-ment Ambient temperature -10 to 55°C, storage : -25 to 65°C(at non-freezing status)
    Ambient humidity 35 to 85%RH, storage : 35 to 85%RH(at non-freezing status)
    Approval CE,UL
    Unit weight Approx. 159g Approx. 149g Approx. 253g
    Document download
    † Environment resistance is rated at no freezing or condensation.

    Reviews

    Write a review