Meter, AC Amps, LED, 1/32 DIN, 4-Digit, 0-5A Input, Indication Only, 12-24 VDC

$200.95

Model Number:
MT4N-AA-E0
Availability:
Call + 1. 847. 388. 7191
Brand:
AUTONICS

Not yet rated Write a review

Description

Wide range of Autonics panel meters are the cost-effective and high performance tools for the display and control of the analog variables such as voltage, current and frequency, and also speed and duration of the various industrial devices. You may choose any product to satisfy your needs from our wide range of product line-up.

Specifications

Series MT4N-DV-E⋲
MT4N-DA-E⋲
MT4N-AV-E⋲
MT4N-AA-E⋲
MT4N-DV-4⋲
MT4N-DA-4⋲
MT4N-AV-4⋲
MT4N-AA-4⋲
Measurement input DC voltage, ampere AC voltage, ampere, Frequency DC voltage, ampere AC voltage, ampere, Frequency
Power supply 12-24VDC/AC 100-240VAC
Allowable voltage range 90 to 110%
Power consumption DC: 3W, AC: 5VA /
For MT4N-⋲⋲-E5 - DC: 5W, AC: 8VA
5VA
Display method 7Segment LCD display, Character height: 9mm
Display accuracy • 23°C±5°C - DC type: F.S. ±0.1% rdg ±2digit / AC type : F.S. ±0.3% rdg ±3digit
DC/AC type : F.S. +0.3% rdg +3digit max. only for 5A terminal.
• -10°C to 50°C - DC/AC type: F.S. ±0.5% rdg ±3digit
Max. allowable input 110% F.S. for each measured Input range
A/D conversion method Practical oversampling using successive approximation ADC
Sampling cycle DC type : 50ms, AC type : 16.6ms
Max. display range -1999 to 9999(4digit)
Preset output • Relay output - Contact capacity : 125VAC 0.3A, 30VDC 1A/Contact composition : N.O(1a)
• NPN/PNP Open Collector output - 12-24VDC ±2V 50mA Max.(Load resistance)
Sub output
(Transmission output)
• RS485 communication output - Baud rate : 1200/2400/4800/9600, Communication method
: 2 wires half duplex, Synchronous method: Sub-synchronization, Protocol : Modbus type
• DC4-20mA output - Resolution : 12,000 division(Load resistance max. 600Ω)
AC measuring function† 1 Selectable RMS or AVG
Frequency measuring function† 1 Measurement range : 0.100 to 9999Hz(Differ according to decimal point position)
Hold function† 2 lncludes(Outer hold function)
Insulation resistance Min. 20MΩ(at 500VDC megger)
Dielectric strength 1000VAC for 1 minute (Between external terminal and case) 2000VAC for 1 minute (Between external terminal and case)
Noise strength ±2kV the square wave noise(pulse width: 1µs) by the noise simulator
Vibration Mechanical 0.75mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2hour
Malfunction 0.5mm amplitude at frequency of 10 to 55Hz(for 1 mln.) In each of X, Y, Z directions for 10mlnutes
Shock Mechanical 100m/s²(10G) in each of X, Y, Z directions for 3 times
Malfunction 300m/s²(30G) in each of X, Y, Z directions for 3 times
Environment Ambient temperature -10 to 50°C, storage: -20 to 60°C
Ambient humidity 35 to 85%RH, storage: 35 to 85%RH
Insulation type Double insulation or reinfored insulation(Mark: ⊡, dielectric strength between the measuring input part and the power part: 1kV)
Approval CE -
Weight† 3 Approx. 125g(approx. 64g)
Document download
† 1: AC measuring function, and frequency measuring function are only for AC measuring input type.
† 2: The indicator has no Hold function.
† 3: The weight with packaging and the weight in parentheses is only unit weight.
† Environment resistance is rated at no freezing or condensation.

Reviews

Write a review